jjs_82 Posted March 8, 2014 Share Posted March 8, 2014 Hi all i'm thinking about getting these shoes from RHD Japan. What is rhd japan like to deal with and this the right part number (IS 100A) Link to comment Share on other sites More sharing options...
Gaz6002 Posted March 8, 2014 Share Posted March 8, 2014 I had some but I found they kept getting caught on the pedals. Link to comment Share on other sites More sharing options...
Dnk Posted March 8, 2014 Share Posted March 8, 2014 Hand brake shoes ? if so just fit stock or patter job from local motor factors Link to comment Share on other sites More sharing options...
jjs_82 Posted March 8, 2014 Author Share Posted March 8, 2014 I had some but I found they kept getting caught on the pedals. Your pedals are to big Link to comment Share on other sites More sharing options...
jjs_82 Posted March 8, 2014 Author Share Posted March 8, 2014 Hand brake shoes ? if so just fit stock or patter job from local motor factors I could do but i want the project mu Link to comment Share on other sites More sharing options...
jjs_82 Posted March 9, 2014 Author Share Posted March 9, 2014 Can anyone help me with this Link to comment Share on other sites More sharing options...
bignum Posted March 9, 2014 Share Posted March 9, 2014 Looks like the correct part,http://www.project-mu.co.jp/en/products/shoe_inner.html Also nengun are a supplier of project mu stuff. Link to comment Share on other sites More sharing options...
jjs_82 Posted March 10, 2014 Author Share Posted March 10, 2014 Looks like the correct part,http://www.project-mu.co.jp/en/products/shoe_inner.html Also nengun are a supplier of project mu stuff. Thanks Link to comment Share on other sites More sharing options...
verossa Posted March 10, 2014 Share Posted March 10, 2014 Unless you use your standard handbrake for anything other than stopping the car from rolling away then I wouldn't spend the money on these. If your handbrake isn't behaving then give it a service; clean and grease all moving parts, clean out the drums and give the pads a rub down with some sandpaper to rough them up again for bite. You'll be amazed at the difference. Otherwise make sure to use your handbrake to bring the car to a stop from a low speed once a week, this will keep the surface on the drum from rusting up badly. Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 10, 2014 Share Posted March 10, 2014 £104-00 quid for handbrake shoes??? Jeez, I've seen it all.... Presumably plus duty, carriage blah blah? SHEER MADNESS Link to comment Share on other sites More sharing options...
jjs_82 Posted March 11, 2014 Author Share Posted March 11, 2014 Yes 135 Euro to my door. Should have them soon Link to comment Share on other sites More sharing options...
jay200bhp Posted March 11, 2014 Share Posted March 11, 2014 Yes 135 Euro to my door. Should have them soon will you have the car dyno tested for bhp afterwards? Link to comment Share on other sites More sharing options...
David P Posted March 11, 2014 Share Posted March 11, 2014 Looks like the correct part,http://www.project-mu.co.jp/en/products/shoe_inner.html Also nengun are a supplier of project mu stuff. Do you get a free little Teddy with those? Link to comment Share on other sites More sharing options...
jjs_82 Posted March 11, 2014 Author Share Posted March 11, 2014 will you have the car dyno tested for bhp afterwards? Yes I hope to get around 700+ Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 11, 2014 Share Posted March 11, 2014 I bet Pistorious pays less for his shoes than that If you need handbrake shoe pull off springs I have special red ones at £12 each plus VAT. Link to comment Share on other sites More sharing options...
Digsy Posted March 11, 2014 Share Posted March 11, 2014 "For spins and drifting". Should have guessed. Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 11, 2014 Share Posted March 11, 2014 Drifting is to motorsport what draughts is to chess. Banger racing with tyre smoke, body kits and trainers. I promised not to name the well known race team manager that said that to me the other month. Made me chuckle Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now