SilentAgro Posted March 8, 2014 Share Posted March 8, 2014 Afternoon, I managed to 'gently' curb my car last week. I have managed to get a new wheel for it I then went to take it to check alignment. As you can see, the toe is out by A LOT on the rear drivers side. I'm guessing something is bent. Would anyone know what it could be? Thanks, Joe Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 8, 2014 Share Posted March 8, 2014 (edited) I don't wish to sound rude but your car looks all over the shop from those figures. The toe on the rear could be due to bent toe control arm, bent hub, bent lower arm that controls the camber or bent eccentric adjusters Edited March 8, 2014 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
SilentAgro Posted March 8, 2014 Author Share Posted March 8, 2014 Not being rude at all dude! It was a bad spin into the curb. That rear took most of it, but it did mess up them all a little bit. Thanks for the details =] Quote Link to comment Share on other sites More sharing options...
fastcar Posted March 8, 2014 Share Posted March 8, 2014 I hit my rear wheel on a curb had to replace the wheel. Then had to replace all the lower control arms on the rear. It made the toe and camber better but was still out so had to replace the axle hub carryer to get bring it all back into line. Had months of a wheel alignment centre telling me it wasn't anything to worry about. Obviously they didn't know how much of a pain in the ass a supra is to drive without the correct wheel alignment Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.