Suprakeith Posted March 4, 2014 Share Posted March 4, 2014 Thought I would share what plans have for the supra, well to start with few weeks ago fitted hub-centric spacers(25mm rear and 20mm front) have done full service last weekend and car is booked in Wednesday for geo set up. Then this weekend will be fitting my brand new uk spec front brakes also have ordered a NX NOS wet kit from states including bottle warmer,15lb bottle and a purge system undecided at minute if will use 50bhp shot or 75bhp for the kit. Hoping to have the NOS kit fitted in next 6 to 8 weeks at MGT. Then once that's all done will be focusing on the body as have Veilside rear spats that need to be fitted and also TRD front wings but before that the supra is going to be waxoyl'ed, plus will be ordering SRD undertray in couple weeks aswell. Plus want to get my Bomex front bumper resprayed and repaired then replace the mesh with smaller black mesh to match the TRD front wings. Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Here is few pictures of how supra sits at moment with spacers on, had to use phone to upload pictures as have problem with picture library on laptop. Link to comment Share on other sites More sharing options...
jim Posted March 4, 2014 Share Posted March 4, 2014 Nice Keith, the spacers have really given it an agressive stance I'd maybe give it a few months before undersealing unless it's kept in a garage? Link to comment Share on other sites More sharing options...
scott87 Posted March 4, 2014 Share Posted March 4, 2014 Looks good. What spacers did you get? Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Thank you and I got hubcentric spacers 25mm on rear and 20mm on the front. Link to comment Share on other sites More sharing options...
scott87 Posted March 4, 2014 Share Posted March 4, 2014 Thank you and I got hubcentric spacers 25mm on rear and 20mm on the front. Yer sorry. What make and where is what i meant. I did read the first post Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 I got them from a wheel spacer site I found online can't remember off top of head but can look later and send you the link Scott Link to comment Share on other sites More sharing options...
Herb Posted March 4, 2014 Share Posted March 4, 2014 Sounds interesting! Keep us updated with your nitrous kit! Regards, Herbert Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Nice Keith, the spacers have really given it an agressive stance I'd maybe give it a few months before undersealing unless it's kept in a garage? Thank you and yea she does look more aggressive for sure and she isn't kept in garage so could be idea to let weather dry abit before get her undersealed. Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Sounds interesting! Keep us updated with your nitrous kit! Regards, Herbert Will do chap Link to comment Share on other sites More sharing options...
Why T Posted March 4, 2014 Share Posted March 4, 2014 I got them from a wheel spacer site I found online can't remember off top of head but can look later and send you the link Scott Can i also get this info please. Love the look of the wheels with the spacers Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Yea no worries mate, sent the information to Scott in pm will do same for you. Link to comment Share on other sites More sharing options...
thomo8568 Posted March 4, 2014 Share Posted March 4, 2014 Hi mate. If your thinking of running 50+ shot I would use a controller. Otherwise your running the chance of damage to the engine or gear box. Are you running single point or direct port? Why you not fitting it yourself? I've done both my set ups on my car and wasn't to hard. Mine is a Wizard of nos kit but shouldn't be to different. Link to comment Share on other sites More sharing options...
thomo8568 Posted March 4, 2014 Share Posted March 4, 2014 Also have you found a place local for refills? As a bottle don't last that long at first, as your always using it. Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 I running single point at minute and I useless with electrics that's main reason not trying to fit kit myself. And that's the main reason why unsure of what shot to use think will proberly use 50 shot until get controller but the NOS kit comes with few delivery options so may have it in full open throttle switch so only comes in when foot to floor Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Haven't found local place yet for refills Link to comment Share on other sites More sharing options...
skippyboyo1 Posted March 4, 2014 Share Posted March 4, 2014 Hi mate. If your thinking of running 50+ shot I would use a controller. Otherwise your running the chance of damage to the engine or gear box. Are you running single point or direct port? Why you not fitting it yourself? I've done both my set ups on my car and wasn't to hard. Mine is a Wizard of nos kit but shouldn't be to different. You 100% need a progressor!!! I've had with and without, dump it all in at once and you will have issues... I blew a piston on an evo 5 as I was stupid enough not to use a progressor.... Never again. Link to comment Share on other sites More sharing options...
thomo8568 Posted March 4, 2014 Share Posted March 4, 2014 The wiring is easy. Only a couple of cables. I've got both mine on tps and switch, so both have to be activated for it to work. Used to just be on tps but got annoying spinning wheels when pulling out of a junction/roundabouts fast. There is a mail order refill service if you don't find anywhere local, could be an idea to get a spare bottle if you can find one cheap. If you got a garage you can rent big bottles and do the refilling yourself. Link to comment Share on other sites More sharing options...
Suprakeith Posted March 4, 2014 Author Share Posted March 4, 2014 Well will have a look at it all when it turns up and see about fitting, and I was thinking about having tps and switch so can engage it in gear 2 onwards and that mail order idea sounds intresting will look Into that Link to comment Share on other sites More sharing options...
Suprakeith Posted March 15, 2014 Author Share Posted March 15, 2014 Well bit of update have fitted my new uk 4pot brakes with new discs and pads, just need to re bleed them tomorrow as pedal bit to soft Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now