Dreamscape36 Posted March 30, 2014 Share Posted March 30, 2014 Mine was 347bhp - TT bpu Quote Link to comment Share on other sites More sharing options...
Justin Bieber Posted March 30, 2014 Share Posted March 30, 2014 Sounds like a bit of a heartbreaker of a dyno! What did supraleeturbo get? I know littler put the car on several dynos and got 400hp at the flywheel for all of them, would be an interesting comparison! Quote Link to comment Share on other sites More sharing options...
Supraleeturbo Posted March 30, 2014 Share Posted March 30, 2014 I did not run I know what mines running and she will hit the dyno once she's had some Srd love :-) Quote Link to comment Share on other sites More sharing options...
Benjy Posted March 30, 2014 Share Posted March 30, 2014 346.8bhp. Not too pleased if I'm honest. However, I am running 2.5" intercooler piping, and I've got a boost leak. Max boost was 1.14 on the rollers but apparently it was tailing off to around a bar. Quote Link to comment Share on other sites More sharing options...
dude Posted March 30, 2014 Share Posted March 30, 2014 (edited) You need to remember guys that the ambient temp in the dyno cell was at times 30 degrees !!!!! resulting in heat soak etc so those of you missing 20hp etc thats prob about right! The Lambo was run with no temp prob as it would not reach the back (need to extend the lead) so as a quick work out IT was 25 on the run but underbonnet was around 75 so prob add 80hp, still would appear to be down !!! Was a good day as always guys and thanks for attending. On the other hand you need to remember that a lot made exactly what was expected (NA's and Mr Pig for example) so well are they known as heartbreakers LOL Edited March 30, 2014 by dude (see edit history) Quote Link to comment Share on other sites More sharing options...
Benjy Posted March 30, 2014 Share Posted March 30, 2014 You need a massive, industrial air conditioning unit in there John. Lol I've tweeked my boost controller now and she appears to be hitting 1.23, dropping slightly and holding 1.19bar. So may pop it back for a power run at some point. Early in the morning. When it's nice and cold... Quote Link to comment Share on other sites More sharing options...
dude Posted March 30, 2014 Share Posted March 30, 2014 You need a massive, industrial air conditioning unit in there John. Lol I've tweeked my boost controller now and she appears to be hitting 1.23, dropping slightly and holding 1.19bar. So may pop it back for a power run at some point. Early in the morning. When it's nice and cold... Hmmmm AC just would never work dude as the exhaust fans empty the cell in about a sec !!! Come and plug the smoke machine in and find the boost leak, that and a cooler day will be your missing 50 odd hp. Quote Link to comment Share on other sites More sharing options...
Graham1984 Posted March 30, 2014 Share Posted March 30, 2014 Did John have a big smirk on his face whilst breaking peoples hearts with their power results Sound like it was a good day though, nice weather for it too. Quote Link to comment Share on other sites More sharing options...
Benjy Posted March 30, 2014 Share Posted March 30, 2014 I've got a smoke machine mate, so when I get a clear day I'll smoke it up and see where it's going. Need to get this 3" pipework sorted out aswell but fitting the 2.5" stuff was a PITA! Quote Link to comment Share on other sites More sharing options...
Rich.2211 Posted March 30, 2014 Share Posted March 30, 2014 I've got a smoke machine mate, so when I get a clear day I'll smoke it up and see where it's going. Need to get this 3" pipework sorted out aswell but fitting the 2.5" stuff was a PITA! Is the 2.5" pipework really a restriction? I've spoke to a few people about diameter of intercooler pipework and the general consensus is 2.5" is good for well over 400bhp. Quote Link to comment Share on other sites More sharing options...
Benjy Posted March 30, 2014 Share Posted March 30, 2014 It's not so much the diameter as the fitment. It's so tight that in some places it's impossible to fit a Mikalor clamp, and Jubilee's are pants for silicone hoses. I've got a mate fabricating some pipe work, and I may aswell go for 3" pipes as if I do upgrade later on, I've already done the IC pipes Quote Link to comment Share on other sites More sharing options...
dude Posted March 30, 2014 Share Posted March 30, 2014 I think I have some 3" somewhere Im up there in a minute so will have a look. Quote Link to comment Share on other sites More sharing options...
Benjy Posted March 30, 2014 Share Posted March 30, 2014 You still got my number? Let me know and i'll shoot down and grab it if you have. Half the battle won then. Quote Link to comment Share on other sites More sharing options...
dude Posted March 30, 2014 Share Posted March 30, 2014 PM it to me again just in case Quote Link to comment Share on other sites More sharing options...
Big Supes Posted March 30, 2014 Author Share Posted March 30, 2014 Going to put a little video together. I have most of the cars, although i might have missed a couple at the start... If anyone wants there dyno graph featured, email over to [email protected]. Kinda got a feeling I wont be receiving many emails though. Supes did 349bhp (bpu). The guys said it'll pull more power, but the dyno and bay was baking after the 700bhp Audi S6 had just been on. Think it's time to lose the stock SMIC and have another run. All in all everything was running on the button (no smoke or missis) so I'm a happy camper. Awesome day....head is still ringing from that Lambo. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted March 30, 2014 Share Posted March 30, 2014 Send you an email Adam with a video of Parry, one of Pig and one of Abs. A picture at the end of the day Quote Link to comment Share on other sites More sharing options...
Big Supes Posted March 30, 2014 Author Share Posted March 30, 2014 Sweet. And, that picture is effin priceless. Quote Link to comment Share on other sites More sharing options...
listy Posted March 30, 2014 Share Posted March 30, 2014 Send you an email Adam with a video of Parry, one of Pig and one of Abs. A picture at the end of the day http://i203.photobucket.com/albums/aa284/mattdavies1988/9668FF7F-9D99-4048-9F09-888D6EBA8674_zpsnxyyeaka.jpg "Pig was 'ere" Quote Link to comment Share on other sites More sharing options...
mattdavies Posted March 30, 2014 Share Posted March 30, 2014 Screen shot from Abs Video !! Quote Link to comment Share on other sites More sharing options...
james_cbr Posted March 30, 2014 Share Posted March 30, 2014 grate pics there hears my first upload Quote Link to comment Share on other sites More sharing options...
Big Supes Posted March 30, 2014 Author Share Posted March 30, 2014 Couple of piccies... Quote Link to comment Share on other sites More sharing options...
mattdavies Posted March 30, 2014 Share Posted March 30, 2014 - Pig - Abs Flames Quote Link to comment Share on other sites More sharing options...
Big Supes Posted April 7, 2014 Author Share Posted April 7, 2014 Just tying up the video for this... have been ill the last couple of weeks and busy with work... Has anyone got an uncompressed video of Pig's burnout they can send to me or host somewhere I can download it? Quote Link to comment Share on other sites More sharing options...
Abz Posted April 7, 2014 Share Posted April 7, 2014 Just tying up the video for this... have been ill the last couple of weeks and busy with work... Has anyone got an uncompressed video of Pig's burnout they can send to me or host somewhere I can download it? This any good? Or if you PM me your number I could send it directly to you if you have WhatsApp. Quote Link to comment Share on other sites More sharing options...
Big Supes Posted April 7, 2014 Author Share Posted April 7, 2014 That's perfect. Hmm, keepvid isn't playing ball and I think the file size will exceed whatsapp's limited. Do you have an outlook or hotmail email account? Or dropbox? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.