LOGIE Posted February 11, 2014 Share Posted February 11, 2014 From what I gather the traction control button on supras came with either trac, slip or snow written on them. Can anyone tell me if the pins in the back of the button are the same on all 3 versions? I bought a tt dash loom and the connector doesn't fit my slip control button. Link to comment Share on other sites More sharing options...
wile e coyote Posted February 11, 2014 Share Posted February 11, 2014 The facelift had the snow button as it has the later tc system and ecu Link to comment Share on other sites More sharing options...
ScottC Posted February 11, 2014 Share Posted February 11, 2014 I could be wrong but I thought the traction control wiring to the switches was part of the bulkhead loom Link to comment Share on other sites More sharing options...
LOGIE Posted February 11, 2014 Author Share Posted February 11, 2014 I could be wrong but I thought the traction control wiring to the switches was part of the bulkhead loom Whats the difference between the bulkhead loom and the dash loom mate? Link to comment Share on other sites More sharing options...
LOGIE Posted February 11, 2014 Author Share Posted February 11, 2014 Heres what I was sold. Prominent black Plug on right what I thought was traction connector. I was told this loom was off an early RZ (93) iirc Link to comment Share on other sites More sharing options...
ScottC Posted February 11, 2014 Share Posted February 11, 2014 (edited) The bulkhead loom runs under the windscreen behind the steering column and fan heater. Having to guess here without looking but judging by the postion of that plug I would say it's for the hazard switch Edit: Just checked, the wiring for the slip control and it is on the bulkhead loom. Edited February 11, 2014 by ScottC (see edit history) Link to comment Share on other sites More sharing options...
LOGIE Posted February 12, 2014 Author Share Posted February 12, 2014 The bulkhead loom runs under the windscreen behind the steering column and fan heater. Having to guess here without looking but judging by the postion of that plug I would say it's for the hazard switch Edit: Just checked, the wiring for the slip control and it is on the bulkhead loom. ahh ffs cheers Scott im off to seek a TT bulkhead loom. Link to comment Share on other sites More sharing options...
ScottC Posted February 12, 2014 Share Posted February 12, 2014 You're going to get yourself in a right muddle swapping all these looms from different cars. Link to comment Share on other sites More sharing options...
scott87 Posted February 12, 2014 Share Posted February 12, 2014 http://img.tapatalk.com/d/14/02/11/7uzuva8e.jpg Heres what I was sold. Prominent black Plug on right what I thought was traction connector. I was told this loom was off an early RZ (93) iirc In this picture there is a small green led. Can i have it please or are you going to use it? There are normally 2, sometimes have little covers on too?! Link to comment Share on other sites More sharing options...
LOGIE Posted February 19, 2014 Author Share Posted February 19, 2014 You're going to get yourself in a right muddle swapping all these looms from different cars. All looms are off same car mate. Just bought at different times. Bay loom is off different car but same year and model and spec. Link to comment Share on other sites More sharing options...
Big Supes Posted February 19, 2014 Share Posted February 19, 2014 The black plug you mentioned in the picture is what plugs into the traction control switch on mine. Link to comment Share on other sites More sharing options...
David P Posted February 19, 2014 Share Posted February 19, 2014 When you have matching engine bay and bulkhead looms, your wipers will work again. Link to comment Share on other sites More sharing options...
LOGIE Posted February 19, 2014 Author Share Posted February 19, 2014 The black plug you mentioned in the picture is what plugs into the traction control switch on mine. It for the active spoiler mate i have a spare active button and checked. I have the connector for the traction now its on the bulkhead loom. Theres 2 looms behind the dash Link to comment Share on other sites More sharing options...
LOGIE Posted February 19, 2014 Author Share Posted February 19, 2014 When you have matching engine bay and bulkhead looms, your wipers will work again. Yeah I have the looms now. Just wondering if the heating system will need to come out to fit the bulkhead loom. Link to comment Share on other sites More sharing options...
David P Posted February 19, 2014 Share Posted February 19, 2014 No, but you might need to loosen it. Link to comment Share on other sites More sharing options...
LOGIE Posted February 19, 2014 Author Share Posted February 19, 2014 No, but you might need to loosen it. Thanks mate. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now