mk1its Posted February 9, 2014 Share Posted February 9, 2014 Guys Last week I had fitted an uprated ally smic and a hard pipe kit. Since then, the boost doesn't feel as tight and I'm def making the turbos work harder Is there a device to test whether there is any boost leak? I'm guessing it's leaking boost since the garage fitted it. Cheers Mark. Link to comment Share on other sites More sharing options...
mellonman Posted February 9, 2014 Share Posted February 9, 2014 A good start would be what boost was youbmaking and what boost are you making now, could well be a loose clip or boost leak from bad fitment Link to comment Share on other sites More sharing options...
Guest Budz86 Posted February 9, 2014 Share Posted February 9, 2014 Bear in mind that if the pipes are a larger diameter now than they were before, this will cause the system to build boost pressure a little slower as the system capacity is a larger volume. Add that to the larger IC capacity and you may have your answer. As Mellonman says though, before and after results will help as if it's a massive difference, there may be a leak somewhere Link to comment Share on other sites More sharing options...
TubbyTwo Posted February 9, 2014 Share Posted February 9, 2014 Using any boost control? As others have said you now have a greater volume to fill before the boost reaches the same level. Were you ruw the stock ic before? Link to comment Share on other sites More sharing options...
mk1its Posted February 9, 2014 Author Share Posted February 9, 2014 Yeah I've got a hks evc controlling the boost and I'd say it's getting to the same boost as before but I am having to use more throttle. That's misleading and confusing, let me explain. Before the change, the boost was very tight and on the damp roads of late, I've only been using wot when I'm already on second turbo (over 4k revs) and it then hits 106kpa (about 15psi), if I tried wot before 4k the wheels just span up. Now, it feels as though I have to use a more throttle to get the same response, almost as though the torqueness (for the want of a better word) has lowered. It def doesn't feel as quick. The turbo oil seals are leaking slightly and there is a lot of play in the shafts. I've some replacements coming so that'll help but I do think there's something else at large here.... I did notice a small slit in the black silicone pipe next to the first turbo.... This cannot be helping things..... Does anyone know what size silicon piping I need without me taking it off? And where I can buy it from? Link to comment Share on other sites More sharing options...
mk1its Posted February 9, 2014 Author Share Posted February 9, 2014 Oh and yes I was using the stock ic with standard pipes before hand. Oh and I have had to turn the percentage compensation over standard boost to 24% to achieve the same boost... So it's def going somewhere.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now