Tommyd16 Posted February 5, 2014 Share Posted February 5, 2014 Where is the best place to route through the bulk head for vac hose? Link to comment Share on other sites More sharing options...
Gpro Posted February 5, 2014 Share Posted February 5, 2014 Is this a manual or electronic boost gauge? i.e have you got a solenoid or does the vacuum line plug straight on to the gauge? Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 It's an apexi boost gauge. Has a Seperate sensor Link to comment Share on other sites More sharing options...
Big Supes Posted February 5, 2014 Share Posted February 5, 2014 There's a large grommet with ample space to the left of the bulk head. You can't miss it. Just push it through from the engine side and pick it up under the steering wheel. Link to comment Share on other sites More sharing options...
Gpro Posted February 5, 2014 Share Posted February 5, 2014 There's a large grommet with ample space to the left of the bulk head. You can't miss it. Just push it through from the engine side and pick it up under the steering wheel. Definitely the easiest way, then you can feed it behind the dashboard very easily. Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Thank you! Link to comment Share on other sites More sharing options...
Big Supes Posted February 5, 2014 Share Posted February 5, 2014 Happy to help. Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Them hoses are a bitch to get on that t peice! Link to comment Share on other sites More sharing options...
Big Supes Posted February 5, 2014 Share Posted February 5, 2014 Shouldn't be too hard. Don't forget the filter whilst you're there. Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 What boost should I be at idle 0? I'm at -0.5 :s Not fully wired properly yet tho but I should think that would be a problem Link to comment Share on other sites More sharing options...
Big Supes Posted February 5, 2014 Share Posted February 5, 2014 You'll always have vacuum on idle. Sounds about right, but someone should know exactly what it should be. Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Sorry not really played with turbos before lol Link to comment Share on other sites More sharing options...
Big Supes Posted February 5, 2014 Share Posted February 5, 2014 No worries mate. The fun starts now! Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Lol what's the boost on a standard tt auto? Link to comment Share on other sites More sharing options...
Gpro Posted February 5, 2014 Share Posted February 5, 2014 Lol what's the boost on a standard tt auto? Stock i think its 0.7 bar and at bpu they usually raise it to 1.1/1.2 bar (Don't go over 1.2 bar) Also note on a cold day you may boost a little bit more Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Cheers. Is just the turbos that can only go to 1.2 bar? I have jspec btw Link to comment Share on other sites More sharing options...
Gpro Posted February 5, 2014 Share Posted February 5, 2014 (edited) Yeah turbos tend to blow if you run them over 1.2 bar for X amount of time. Also injectors are pretty much maxed out at 1.2 bar Edited February 5, 2014 by Gpro (see edit history) Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Nice one cheers Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 5, 2014 Author Share Posted February 5, 2014 Sorted I thought the dials were going to light up blue to match the gauge though. Oh well (Dash isn't properly put back together yet lol) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now