Jump to content
The mkiv Supra Owners Club

Retro fit cruise control on an N/A??


Si_s Supe

Recommended Posts

You will need a steering wheel with cruise control, a cruise control motor complete with NA throttle cable, and a 4 pinned brake switch.

You will need to check you have the following on your car

A large grey multipinned plug on the inner offside wing near the brake reservoir.

That the plug, that plugs into your brake light switch has 4 wires (don't assume your current brake light switch has four pins just because the plug has four wires)

Edited by ScottC (see edit history)
Link to comment
Share on other sites

You will need a steering wheel with cruise control, a cruise control motor complete with NA throttle cable, and a 4 pinned brake switch.

You will need to check you have the following on your car

A large grey multipinned plug on the inner offside wing near the brake reservoir.

That the plug, that plugs into your brake light switch has 4 wires (don't assume your current brake light switch has four pins just because the plug has four wires)

 

 

Cool, thank you. I'll check it all out.

 

Steveo, it's a small thing that makes all the difference! I use it ALL the time on my S60 D5. Would be a great addition to the Supra!

Link to comment
Share on other sites

Cool, thank you. I'll check it all out.

 

Steveo, it's a small thing that makes all the difference! I use it ALL the time on my S60 D5. Would be a great addition to the Supra!

 

TTs use the same motor but you would have to change the throttle cable to suit an NA

Link to comment
Share on other sites

I looked at one of those rostra ones, they seem to make cruise control for manufactures so should be good

I'm really after as near to standard so put it on the back burner

I totally understand that.

 

Oops, forgot to mention you will need a jspec or uk spec cruise control ecu

But Scott's list of things keeps growing!

I may buy one of these rostra one's and let everyone know how it works out

Link to comment
Share on other sites

Does anyone know the part number for the 4 pin brake switch? I have everything else. What I will say is I initially bought a cruise actuator and I was told it would fit NA and TT sadly it doesn't fit the TT as it sits where the ABS relay box is. I then bought another actuator which is for a TT and it does fit on the other side of the suspension turret.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.