supra_ufo Posted December 13, 2013 Share Posted December 13, 2013 I only have one key and fob for my motor as the other one was misplaced by the previous owner.... Since my car has no locks I am totally relying on the fob/central locking for getting in and out of the car (being an aero I could break into it but I haven't practised this LoL) I have a Clifford alarm but unsure about the model, However I have come across a black box with a serial and and 5 digit code underneath the dash (valet code?) I guess this is good news as it allows me to code another key fob. I have a few questions to ask though 1. Does the car have a stock immobiliser within the key? And does the clifford alarm overwrite this? I want to create another copy of my key as its the only key that I have that will start the engine 2. how do I identify the model of my current alarm? Mainly so I can order another key fob, and maybe purchase extras like remote start etc If its any help my fob looks like this Quote Link to comment Share on other sites More sharing options...
Iky Posted December 13, 2013 Share Posted December 13, 2013 (edited) Might be concept 600 g4/5 mark 1 It should say model/serial no. on the black box http://www.clifford.co.uk/ProductPages/Remotes_904100.html Edited December 13, 2013 by Iky (see edit history) Quote Link to comment Share on other sites More sharing options...
ibby Posted December 24, 2013 Share Posted December 24, 2013 i would also like to know how to program additional remotes! PLEASE Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted December 24, 2013 Author Share Posted December 24, 2013 Ibby when I find out I will let you know...do you know which alarm you have? Quote Link to comment Share on other sites More sharing options...
ibby Posted December 25, 2013 Share Posted December 25, 2013 Its a Clifford 300 I am sure you can program the fob. I am going to go look for the manual now! Quote Link to comment Share on other sites More sharing options...
ibby Posted December 25, 2013 Share Posted December 25, 2013 right looking at the Manual it gives me instructions on how to insert another fob! i just need my valet code - its only 4 digits. Quote Link to comment Share on other sites More sharing options...
sz aero supra Posted January 11, 2014 Share Posted January 11, 2014 no no you dont need the valet code at all!i had same prob but managed to find a link for my clifford 650 mk11 which gave me step by step instructions on how to programme a new remote.didnt need valet code,was panicing as didnt no it.below my stereo i have a star symbol n a square symbol which is where you would find front splitter adjustment etc.the symbols can be entered in manually depending on wot you need your remote to do.if you need further assistance get in touch m8 Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted January 12, 2014 Author Share Posted January 12, 2014 I got another fob but need to get around to program it, will drop you a PM. I believe mine is a concept 500 or 550 Quote Link to comment Share on other sites More sharing options...
sz aero supra Posted January 13, 2014 Share Posted January 13, 2014 no probs sure i can dig up the link off the net Quote Link to comment Share on other sites More sharing options...
sz aero supra Posted January 13, 2014 Share Posted January 13, 2014 found page on net just now for your clifford.very similar to my 650 mk11 to programme in new remote,take you 2 mins Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted January 13, 2014 Author Share Posted January 13, 2014 PM'ed... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.