viper Posted December 2, 2013 Share Posted December 2, 2013 Hi all, im looking to make the wiring harness upf or daywalker in the coming weeks and wanted some opinions and advice on the best way of goign about it and to see if there where any diagrams out there that would assist me. Iv removed all the harnesses out of the current supra. The engine harness is of course on the engine but i have also go the engine bay harness, the cabin harness and the body harness which i have cut from the doors back as i wont be needed the rear lights etc. My plan was to place all the looms in the drag car to get it up and running but i wanted to see if anyone had a diagram of a decent way of either modifying or creating a loom for a drag car, with only the things i need to run it. for example i will not need any lighting or interior electrics such as door and windows. all i need is the basics to allow the engine to run nothing else. Any advice would be much appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.