LOGIE Posted December 1, 2013 Share Posted December 1, 2013 just started the TT lump for the first time today, engine was ticking over fine however...I have a few problems, but I don't have a lot of time to do a search just now (trying to get stuff done during daylight) 1. ABS light is on 2. MANU light not coming on so it prob doesn't work. (TT engine BAY loom has been fitted) 3. Engine gets up to temp but heater is still blowing cold, then heater pipe on right on fire wall started to leak due to pressure? Could I have fitted these the wrong way round? I'll post a pic asap I have still to fit the TT clocks so I don't know (yet) if this will sort out the MANU function but I doubt it. Id appreciated any running commentary ideas whilst I keep working on it guys. Cheers ill prob ad more problems as I find them Quote Link to comment Share on other sites More sharing options...
LOGIE Posted December 1, 2013 Author Share Posted December 1, 2013 ok I "Might" have the solution to ABS problem, I have a missing connector on the sensor at the NSF wheel behind the washer bottle, ill solder one on later. Is it possible I could have fitted heater cooler pipes the wrong way around? Quote Link to comment Share on other sites More sharing options...
LOGIE Posted December 1, 2013 Author Share Posted December 1, 2013 Quote Link to comment Share on other sites More sharing options...
LOGIE Posted December 1, 2013 Author Share Posted December 1, 2013 Ok one of the heater pipes ( the one on the right in pic) is HOT the other is cold?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.