cainhead Posted November 30, 2013 Share Posted November 30, 2013 Hello, I have just fitted a fmic with a hks ssqv bov mounted in the pipe going into the inlet manifold. Do I need to remove the stock bov at all from the turbo side. Thanks in advance for any help Link to comment Share on other sites More sharing options...
Mk4Gaz Posted November 30, 2013 Share Posted November 30, 2013 I don't think you 'have' to remove it, but I've seen other people remove it and use a straight piece of hose to connect the two ports where it would have been That's what I'm planning to do Link to comment Share on other sites More sharing options...
Ian C Posted November 30, 2013 Share Posted November 30, 2013 I wouldn't connect the input and output lines as you'll make a massive boost leak! They need blocking off, not joining Link to comment Share on other sites More sharing options...
Mk4Gaz Posted November 30, 2013 Share Posted November 30, 2013 Interesting, thanks for the info Link to comment Share on other sites More sharing options...
Darren_Whifbitz Posted November 30, 2013 Share Posted November 30, 2013 I wouldn't connect the input and output lines as you'll make a massive boost leak! They need blocking off, not joining Correct block them holes off, HKS do some bungs, if you can't get them Paul can Link to comment Share on other sites More sharing options...
Mk4Gaz Posted November 30, 2013 Share Posted November 30, 2013 Must have been having a brain fart last night, it was late! Of course there would be a huge boost leak, my brain just wasn't working properly lol! Link to comment Share on other sites More sharing options...
cainhead Posted November 30, 2013 Author Share Posted November 30, 2013 Thanks everyone for your comments, thats a great help, will get some bungs ordered. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now