ADD Posted August 23, 2005 Share Posted August 23, 2005 guys and gals how hard is it to fit a full decat? Quote Link to comment Share on other sites More sharing options...
merckx Posted August 23, 2005 Share Posted August 23, 2005 A little awkward getting to the nuts on the turbo elbow, on the older cars the studs might break. On one of mine the corners of the nut had been rounded. It's the sort of thing that can be straight forward or a right pain in the arse. I think you have to be prepared to replace a stud if one does break. Fitting the decat pipes is very easy. You really need to put it up on ramps to get good access and to be safe! Quote Link to comment Share on other sites More sharing options...
magicmatty Posted August 23, 2005 Share Posted August 23, 2005 Did mine last friday.....nuts to remove......3 took around 1.5 hours, the last one popped off in 30 secs..typical. One brought the stud with it, but all in all not a ba job, now sounds great, runs great...Thanks Chris Wilson Def need ramps or lift though to make it manageable Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.