Hassan Posted November 5, 2013 Share Posted November 5, 2013 Hi ive just installed a hks fcd in my supra. I used the instruction from this forum and triple checked all the wiring and connected them properly with no lose wires and set to 9. The thing is im getting a hesitation. From idle to about 3700-800 rpm and then it hits hard with the 2nd turbo. Now i know fcds can have problems so i had a spare and installed that one it made it abit better but its still got a hesitation, sluggish feel and it seems to have less than normal power below 3700 rpm. Any ideas?? Or shall i change it for some thing else? Quote Link to comment Share on other sites More sharing options...
Ian C Posted November 6, 2013 Share Posted November 6, 2013 Your first step is to remove it and see if the problem goes away Quote Link to comment Share on other sites More sharing options...
Hassan Posted November 6, 2013 Author Share Posted November 6, 2013 I was going to try that today Quote Link to comment Share on other sites More sharing options...
st3ven1 Posted November 6, 2013 Share Posted November 6, 2013 What instructions did you use? Quote Link to comment Share on other sites More sharing options...
Hassan Posted November 10, 2013 Author Share Posted November 10, 2013 I fixed the problem. Just installed a Greddy BCC. Super smooth again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.