berg Posted October 17, 2013 Share Posted October 17, 2013 Well i have an oil leak and i think the cause was a newbie error when i built my engine back up i didnt put any sealant on the first 2 camshaft bearing caps Question is can i take the 1 cap off apply sealant and refit or will i need to loosen all the caps in sequence again? Link to comment Share on other sites More sharing options...
Lee P Posted October 17, 2013 Share Posted October 17, 2013 The front caps can be removed with out worrying about sequence. They are fitted with RTV sealant around the edge, tighten to 22nm Link to comment Share on other sites More sharing options...
Dazzi Posted October 17, 2013 Share Posted October 17, 2013 As Lee said, also did you put RTV at both sides of the front caps (on the head) when installing the cam covers with new seals? Link to comment Share on other sites More sharing options...
berg Posted October 17, 2013 Author Share Posted October 17, 2013 Thanks Lee job for tonight to get it read for pod on saturday I didnt use any sealant at all no stupid mistake for skim reading the manual when putting it back together lol Link to comment Share on other sites More sharing options...
berg Posted October 17, 2013 Author Share Posted October 17, 2013 Loctite 5699 ok? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now