simbasupra Posted October 14, 2013 Share Posted October 14, 2013 Hi guys, Started to take the engine out to do a rebuild and i have found the radiator mounting plate has corroded where the intercooler pipe bracket bolts on. I think this is part of the chassis and is welded on? Has anyone else had this? Im guessing this part cant be purchased from Toyota. Would i need to get the piece cut out from a scrap supra and weld it on? I have taken two pics, one from under bonnet and one from under car. Thanks Link to comment Share on other sites More sharing options...
simbasupra Posted October 15, 2013 Author Share Posted October 15, 2013 Ive just found this in the body repair manual and am 99% sure this is the part that i need. Does anyone know if you can buy these? Link to comment Share on other sites More sharing options...
simbasupra Posted October 15, 2013 Author Share Posted October 15, 2013 (edited) Ahh found it, just came across this thread: http://www.mkivsupra.net/vbb/showthread.php?274186-Radiator-support And its part number is 57104-24021 if anyone else has this problem. Anyone know a ball park figure for someone to come out and weld this on? Edited October 15, 2013 by simbasupra (see edit history) Link to comment Share on other sites More sharing options...
Kaan W Posted October 15, 2013 Share Posted October 15, 2013 Check post 1 for how I replaced mine - http://www.mkivsupra.net/vbb/showthread.php?275510-Kaan-s-3-4-Stroked-Wide-Arch-Supra-project!& I had to chop it out and weld another one in, if you can be bothered you can drill the 30 something spot welds out and do it that way. Give Keron a pm he might have one. Link to comment Share on other sites More sharing options...
simbasupra Posted October 15, 2013 Author Share Posted October 15, 2013 Check post 1 for how I replaced mine - http://www.mkivsupra.net/vbb/showthread.php?275510-Kaan-s-3-4-Stroked-Wide-Arch-Supra-project!& I had to chop it out and weld another one in, if you can be bothered you can drill the 30 something spot welds out and do it that way. Give Keron a pm he might have one. Thanks for the info. will see how much a new one is first, then contact keron if its too much. Link to comment Share on other sites More sharing options...
DannoSupra Posted October 15, 2013 Share Posted October 15, 2013 I do believe the part number your looking for is 57104-24021 Edit Damn it, my fault for reading ONLY the first post ... Doh! Link to comment Share on other sites More sharing options...
simbasupra Posted October 15, 2013 Author Share Posted October 15, 2013 Ive just emailed a mobile welder to give me a quote, what kind of price do you guys reckon it will be? just so i know if its a good price or not. The engine will be out by the time it gets done so they will have plenty of room to do it. Link to comment Share on other sites More sharing options...
Dnk Posted October 15, 2013 Share Posted October 15, 2013 I did this on my car, the cross member isn't expensive and is around £100 i think from Toyota, or you can cut out the rotten part and weld in a new section. You'll need to remove the water rad and the aircon rad Link to comment Share on other sites More sharing options...
N-Mir Posted May 14, 2014 Share Posted May 14, 2014 I have the same problem was searching on here to make sure I get the right part off keron, is there any way of preventing this to happen on the new one? Toyota want £155 keron almost half the price. Link to comment Share on other sites More sharing options...
Dnk Posted May 14, 2014 Share Posted May 14, 2014 Tetrosyl Tetra Shutz should do the job Link to comment Share on other sites More sharing options...
N-Mir Posted May 19, 2014 Share Posted May 19, 2014 What is that, was going to google it but sounds a bit dodgy lol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now