Chris Wilson Posted September 22, 2013 Share Posted September 22, 2013 I assume you have never bought anything before then. LOL, I can imagine him being force fed via a tube as he won't buy any food products Bit harsh, the ad is a bit dubious as to its full veracity. Quote Link to comment Share on other sites More sharing options...
JamieP Posted September 23, 2013 Share Posted September 23, 2013 I just realised 1000cc RC injectors producing 1200bhp? i swear thats impossible It is. Quote Link to comment Share on other sites More sharing options...
Darragh Posted September 23, 2013 Share Posted September 23, 2013 G Where are they based? Just off the seven mile straight , co Antrim Northern Ireland , close to Nutts Corner Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 23, 2013 Share Posted September 23, 2013 I think the seller is a) optimistic and b) disco electric. Quote Link to comment Share on other sites More sharing options...
TuneR Posted September 23, 2013 Share Posted September 23, 2013 It'd be nice to see who worked/mapped the car, they would be my main concerns with a single purchases. It'd be so easy to ring those people and have a talk about the car. Tbh there have been a few Irish ads that are stupid recently, maybe there is something in the air..... A nice "V6" one for you. This one had 320bhp as well, but he edited the ad lol Quote Link to comment Share on other sites More sharing options...
simon197911 Posted November 11, 2013 Share Posted November 11, 2013 I got this car for parts for my Supra it has a lot of good parts but they have just need thrown together . plus it drive bad as it has not been maped well Quote Link to comment Share on other sites More sharing options...
TuneR Posted November 11, 2013 Share Posted November 11, 2013 I got this car for parts for my Supra it has a lot of good parts but they have just need thrown together . plus it drive bad as it has not been maped well Might be an idea not to drive it on boost in case you do damage. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 11, 2013 Share Posted November 11, 2013 I think the seller probably had the Blarney Stone in his pocket, he didn't just kiss it en.wikipedia.org/wiki/Blarney_Stone Quote Link to comment Share on other sites More sharing options...
simon197911 Posted November 11, 2013 Share Posted November 11, 2013 He was trying to map it with a copper pipe and gerden hose and head phones . did not pay him any where near 14k Quote Link to comment Share on other sites More sharing options...
drift_bear Posted November 11, 2013 Share Posted November 11, 2013 He was trying to map it with a copper pipe and gerden hose and head phones . did not pay him any where near 14k Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 11, 2013 Share Posted November 11, 2013 He probably made the basic error of not wearing turned down wellies, and not consuming enough Guinness..... Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 11, 2013 Share Posted November 11, 2013 Eh, less of the stereotyping please. And if you look at the original advert he is from Northern Ireland and until you lot decide to give it back you can claim the inhabitants, as well as the territory. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 11, 2013 Share Posted November 11, 2013 With a forum name like Pedro I always assumed you *were* south of the border, well south, down Mexico way? Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 11, 2013 Share Posted November 11, 2013 There you go, making assumptions again. Bloody gringos. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 12, 2013 Share Posted November 12, 2013 Your favorite film: A fistful of Euros? I like you really.... Quote Link to comment Share on other sites More sharing options...
simon197911 Posted January 14, 2014 Share Posted January 14, 2014 Somebody know something about this car: http://www.ebay.co.uk/itm/TOYOTA-SUPRA-SINGLE-TURBO-CONVERSION-1200-BHP-UNDER-10SEC-CAR-FASTEST-2012-QM-NI-/200965674561?pt=Automobiles_UK&hash=item2eca7cd641 take care Lukass from Poland U are lucky u never bought this car mate engine is done in. had it stripped drop to cheack it and found this Quote Link to comment Share on other sites More sharing options...
TuneR Posted January 15, 2014 Share Posted January 15, 2014 U are lucky u never bought this car mate engine is done in. had it stripped drop to cheack it and found this [ATTACH=CONFIG]179431[/ATTACH][ATTACH=CONFIG]179432[/ATTACH] Sore dose mate, i hope everything else doesn't turn out like that. Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted January 15, 2014 Share Posted January 15, 2014 What is that? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 15, 2014 Share Posted January 15, 2014 Remnants of thrust bearings. Or simply put, a scrap stroker crank and a scrap block. A scrap oil pump. A BIG bill To be brutally honest, a supposed race engine (or any rebuilt engine) with all that silicone goo oozing out the side of the sump pan would make me run away, just from a quick look on the ramp. If it oozes out on the outside, it oozes out on the inside, and chokes the strainer as it breaks away. Looks like the thrusts were put in backwards, with the steel backing to the crank, and the bearing material to the block. Maybe... Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted January 15, 2014 Share Posted January 15, 2014 Remnants of thrust bearings. Or simply put, a scrap stroker crank and a scrap block. A scrap oil pump. A BIG bill To be brutally honest, a supposed race engine (or any rebuilt engine) with all that silicone goo oozing out the side of the sump pan would make me run away, just from a quick look on the ramp. If it oozes out on the outside, it oozes out on the inside, and chokes the strainer as it breaks away. Looks like the thrusts were put in backwards, with the steel backing to the crank, and the bearing material to the block. Maybe... One word, ouch. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted January 15, 2014 Share Posted January 15, 2014 Remnants of thrust bearings. Or simply put, a scrap stroker crank and a scrap block. A scrap oil pump. A BIG bill To be brutally honest, a supposed race engine (or any rebuilt engine) with all that silicone goo oozing out the side of the sump pan would make me run away, just from a quick look on the ramp. If it oozes out on the outside, it oozes out on the inside, and chokes the strainer as it breaks away. Looks like the thrusts were put in backwards, with the steel backing to the crank, and the bearing material to the block. Maybe... I really do wish I had your knowledge Chris. Just by looking at the side of a sump pan you can see potential warnings. Quote Link to comment Share on other sites More sharing options...
Havard Posted January 15, 2014 Share Posted January 15, 2014 Remnants of thrust bearings. Or simply put, a scrap stroker crank and a scrap block. A scrap oil pump. A BIG bill To be brutally honest, a supposed race engine (or any rebuilt engine) with all that silicone goo oozing out the side of the sump pan would make me run away, just from a quick look on the ramp. If it oozes out on the outside, it oozes out on the inside, and chokes the strainer as it breaks away. Looks like the thrusts were put in backwards, with the steel backing to the crank, and the bearing material to the block. Maybe... Did I hear a toilet flush? Quote Link to comment Share on other sites More sharing options...
simon197911 Posted January 15, 2014 Share Posted January 15, 2014 Remnants of thrust bearings. Or simply put, a scrap stroker crank and a scrap block. A scrap oil pump. A BIG bill To be brutally honest, a supposed race engine (or any rebuilt engine) with all that silicone goo oozing out the side of the sump pan would make me run away, just from a quick look on the ramp. If it oozes out on the outside, it oozes out on the inside, and chokes the strainer as it breaks away. Looks like the thrusts were put in backwards, with the steel backing to the crank, and the bearing material to the block. Maybe... Is it still ok to send u the parts that look like they can be saved Quote Link to comment Share on other sites More sharing options...
simon197911 Posted January 15, 2014 Share Posted January 15, 2014 The only thing good on the car is the 6 speed box. 8 grand down the drain Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 15, 2014 Share Posted January 15, 2014 Is it still ok to send u the parts that look like they can be saved Of course, no problem Simon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.