Guest Hosky Posted September 1, 2013 Share Posted September 1, 2013 errr...... no - - - Updated - - - Digsy said: I'd assumed he wanted to raise the rev limit too because he broke the rocker arms on his 200. No mate, bee r rev limiter breaks the rocker arms on the sr20det engine because they are shite, and just windered if they done the same on these engines? Link to comment Share on other sites More sharing options...
Scott Posted September 1, 2013 Share Posted September 1, 2013 Digsy said: I'd assumed he wanted to raise the rev limit too because he broke the rocker arms on his 200. Probably looked at them the wrong way Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 I will upload a little video of my bee r in bit, can't do it on iPhone for some reason so will go grab laptop after my coffee, just for reference had the limiter set on 4k Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 (edited) Here is video its only 13seconds long and like said limiter was set to 4k when get longer video of it will upload that aswell. Edited September 1, 2013 by Suprakeith (see edit history) Link to comment Share on other sites More sharing options...
Slutters Posted September 1, 2013 Share Posted September 1, 2013 Sounds great Keith, but i would feel sooo embarrassed doing that.... Link to comment Share on other sites More sharing options...
Ross C Posted September 1, 2013 Share Posted September 1, 2013 Sounds fantastic Keith. The chav in me wanty!!! Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 Slutters said: Sounds great Keith, but i would feel sooo embarrassed doing that.... Thank you very much, have to say sounds mega when live and was bit embarrassed as drew a huge crowd at the cruise tonight which was great but people were shocked it was a N/A Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 Slutters said: Sounds great Keith, but i would feel sooo embarrassed doing that.... They are great fun and does get a lot of attention when use it Link to comment Share on other sites More sharing options...
Guest Hosky Posted September 1, 2013 Share Posted September 1, 2013 Did you wire it in yourself? Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 I got a mate to help me as iam not good with electric diagrams and soldering but it didn't take long at all once got diagram and knew what wires to attach wires too Link to comment Share on other sites More sharing options...
Guest Hosky Posted September 1, 2013 Share Posted September 1, 2013 does it wire in to the ecu or something else? sorry for all the questions Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 Hosky said: does it wire in to the ecu or something else? sorry for all the questions Am happy to answer questions bud so no worries, it wires up to ecu but you just attach the bee r wires so ecu still gets signal and also one wire goes to the handbrake aswell. Link to comment Share on other sites More sharing options...
Guest Hosky Posted September 1, 2013 Share Posted September 1, 2013 just been reading about it. only connect white wire to handbrake if you want the use of rev2. Where is the ecu on one of these cars? Link to comment Share on other sites More sharing options...
Ross C Posted September 1, 2013 Share Posted September 1, 2013 Suprakeith said: Am happy to answer questions bud so no worries, it wires up to ecu but you just attach the bee r wires so ecu still gets signal and also one wire goes to the handbrake aswell. Do you know if there would be any difference/issue in adding it to an auto instead amanual??? - - - Updated - - - Hosky said: just been reading about it. only connect white wire to handbrake if you want the use of rev2. Where is the ecu on one of these cars? Passenger footwell under the carpet in the corner nearest to the engine Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 Yea that's correct the rev2 setting is for the launch control rev1 is your cars rev limiter and the 3rd dial is the gain how much you want it to cut which causes the bangs and the ecu is under the foot rest in passenger foot well, lift the carpet and will see plastic box unbolt that and their is ecu on earthing frame. And cant imagine difference between auto and manual but not 100% on that if honest, would think should be same as its just a rev limiter control box Link to comment Share on other sites More sharing options...
Ross C Posted September 1, 2013 Share Posted September 1, 2013 Thanks. May look into one then Link to comment Share on other sites More sharing options...
Guest Hosky Posted September 1, 2013 Share Posted September 1, 2013 Ross C said: Thanks. May look into one then Same Link to comment Share on other sites More sharing options...
Suprakeith Posted September 1, 2013 Share Posted September 1, 2013 They are fun bits of kit, well great fun if honest Link to comment Share on other sites More sharing options...
Digsy Posted September 2, 2013 Share Posted September 2, 2013 Hosky said: No mate, bee r rev limiter breaks the rocker arms on the sr20det engine because they are $#@!e, and just windered if they done the same on these engines? You'll be doing well to break the rocker arms on a 2JZ because it doesn't have any. Link to comment Share on other sites More sharing options...
Guest Hosky Posted September 2, 2013 Share Posted September 2, 2013 Ahhh that's good then!! Link to comment Share on other sites More sharing options...
Chris Wilson Posted September 2, 2013 Share Posted September 2, 2013 Hosky said: Hello everyone. Everyone loves pops and bangs right? No, not right, some of us don't and see them as infantile and attention seeking, and often the sign of a clueless owner with an exhaust leak. Quote Could you stick the bee-r rev limiter on the n/a supra? And wouldn't pop an bang with out breaking something like the rocker arms on my old nissan 200? Doh! Oh dear..... Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 2, 2013 Share Posted September 2, 2013 How in god's name did this make it into the Tech section? Link to comment Share on other sites More sharing options...
Dnk Posted September 2, 2013 Share Posted September 2, 2013 People will be fitting spark plugs in their exhausts next Rocker arms Link to comment Share on other sites More sharing options...
Chris Wilson Posted September 2, 2013 Share Posted September 2, 2013 Can membership be refused on the basis someone sounds like a chav? I once applied to join a Yahoo group and the owner replied, "Sorry, we have to decline your application to join the $$$$$$$$ Yahoo Group on the basis you sound like a clueless ****wit, good day." I was mortified, and still don't know what I said in the resume. I now laugh about it Maybe I asked about pops and bangs...? Link to comment Share on other sites More sharing options...
Purity14 Posted September 2, 2013 Share Posted September 2, 2013 Since coming back to the forum, it does seem full of this type of stuff. ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now