Rich.2211 Posted December 12, 2013 Share Posted December 12, 2013 Course mate.. This is his business https://m.facebook.com/DetailUK?id=223952630972996&_rdr Cheers fella Quote Link to comment Share on other sites More sharing options...
rob_sri Posted December 13, 2013 Author Share Posted December 13, 2013 Quick shot of the manifold fitted.. Will probably go ffim for the build so this will end up for sale at some stage.. Chromed mounts Black and chrome valve covers Quote Link to comment Share on other sites More sharing options...
rob_sri Posted December 13, 2013 Author Share Posted December 13, 2013 My garage is a mess haha..! Quote Link to comment Share on other sites More sharing options...
Guest aspire Posted December 13, 2013 Share Posted December 13, 2013 Loving this rob...... brilliant Quote Link to comment Share on other sites More sharing options...
rob_sri Posted December 13, 2013 Author Share Posted December 13, 2013 Cheers mate Polished my dipstick........... *sniggers* Powdercoated one was too short as it was bent slightly doh!! :-/ Quote Link to comment Share on other sites More sharing options...
rob_sri Posted December 22, 2013 Author Share Posted December 22, 2013 Quick update: Rotas fitted with some Maxxis MA Z1's really happy with the fitment.. went with 245/35/19 all round in the end and it seems to be a perfect fit and will allow me to go a little bit lower in the future.. still thinking of 10mm spacers for the rear just to bring them flush like the front... we'll see! https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/q79/s720x720/1536675_10151951825859864_464259961_n.jpg Jacked the front up to give it a good clean underneath to get any road salt/remnants of farmyard off the bottom! jetwash and snowfoam inside the arches.. https://scontent-a-lhr.xx.fbcdn.net/hphotos-frc3/q77/s720x720/1497528_10151951825869864_1915284122_n.jpg https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/q71/s720x720/1493111_10151951826049864_627956259_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1463917_10151951826134864_1670642815_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1471749_10151951826219864_1742181185_n.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/q71/s720x720/1525031_10151951826414864_1217072670_n.jpg cleaned and all dried off https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/q77/s720x720/994692_10151951826484864_1218044873_n.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn2/q82/s720x720/1497461_10151951826594864_1069764373_n.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash4/q74/s720x720/1004907_10151951826854864_323867608_n.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1511392_10151951826924864_589847019_n.jpg the fronts fit very flush with the arches!! want the back to be more like this now i think! https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/q77/s720x720/1475880_10151951826779864_1339088598_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q73/s720x720/1483287_10151951826679864_1202679143_n.jpg also fitted some OEM spats really like the look but now its crying out for some skirts! may well go for some modified blitz skirts https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/q75/s720x720/1476678_10151951745044864_2080752908_n.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/t1/q77/s720x720/1525597_10151951745259864_121449501_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/q80/s720x720/1512587_10151953606289864_1115739927_n.jpg https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/q71/s720x720/1535723_10151953606259864_1657503955_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q82/s720x720/1476144_10151953606479864_95234505_n.jpg Quote Link to comment Share on other sites More sharing options...
berg Posted December 22, 2013 Share Posted December 22, 2013 Makes me wish i bought my grids in 19" instead of 18" Car looks good mate, engine is coming on well too Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted December 22, 2013 Share Posted December 22, 2013 Loving the look and how well this is coming along mate Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 8, 2014 Author Share Posted February 8, 2014 its been a while since I updated this thread! money has been elsewhere the last few months with christmas and bought a drift shed with a friend.. behold the beast!.. https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/t1/p180x540/1545154_10151907519196028_955214859_n.jpg its a shitty compact! but.. this 316 has a few.. added extras now after being stripped.. https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1/p180x540/1662577_10151942673711028_589341653_n.jpg welded diff.. 'bride' bucket seats.. hydro handbrake.. rack spacers and a powerflow zaust for... https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc3/t1/p180x540/1512328_10151907518966028_1476495071_n.jpg this... https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn2/t1/q71/s720x720/1546395_10151907519551028_809413338_n.jpg 2.8 straight six with m50 inlet ;D Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 8, 2014 Author Share Posted February 8, 2014 APR cooling plate added.. Plate holder removed and took to bodyshop for colour coding 202 black as it's looking a bit crap..! Also tried my friends 19" 10.5j rota grids in Matt black... Tempted to change the colour of mine to gloss black or dark anthracite.. And maybe some 10-15mm spacers for the rear.. Really kind of like it without the plate on too.. Quote Link to comment Share on other sites More sharing options...
Rich.2211 Posted February 8, 2014 Share Posted February 8, 2014 Looking good mate, any one told you you're missing a horn? Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 8, 2014 Author Share Posted February 8, 2014 haha!!! until you pointed that out before I genuinely did wonder why my horn sounded so pathetic..!!! might have to post a wanted thread or get one of these Quote Link to comment Share on other sites More sharing options...
Rich.2211 Posted February 8, 2014 Share Posted February 8, 2014 haha!!! until you pointed that out before I genuinely did wonder why my horn sounded so pathetic..!!! might have to post a wanted thread or get one of these If you get one of those you have to promise to weld the doors shut on the Supra and jump in from now on! Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 8, 2014 Author Share Posted February 8, 2014 ....maybe for the beemer though dont mind painting that orange either haha!! heres a few of my mates new 350Z with the supra too https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/t31/q72/s720x720/1489575_575644759193306_1143963417_o.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/t31/q71/s720x720/1014715_575644799193302_699300110_o.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/t31/q71/s720x720/1073069_575644155860033_2073447041_o.jpg https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn2/t31/q74/s720x720/1064639_575644775859971_1715104616_o.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/t31/q71/s720x720/77993_575644839193298_56535218_o.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/t31/q71/s720x720/859861_575644825859966_1316721801_o.jpg Quote Link to comment Share on other sites More sharing options...
Poshmalc Posted February 9, 2014 Share Posted February 9, 2014 Great thread mate and top attention to detail, hope I can get mine looking anywhere near as mint as yours! Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 15, 2014 Author Share Posted February 15, 2014 Great thread mate and top attention to detail, hope I can get mine looking anywhere near as mint as yours! Cheers mate it's coming along well but still got loads to do.. This weather isn't helping progress any!! Bought what I was told was a GReddy pillar pod for boost/afm gauges and turns out when It came in the post it's a fibreglass copy.. Still put it in place anyways to see what it looks like.. Fitment seems okay in fairness but will need smoothing and painting in to the original pillar to look any good Undecided on what to do with it really.. Either take it to a Bodyshop for the work or just bin it! Quote Link to comment Share on other sites More sharing options...
Mugello Posted February 15, 2014 Share Posted February 15, 2014 Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 20, 2014 Author Share Posted February 20, 2014 Gucci looking nuts and bolts! Thanks Rich.2211 for the recommendation.. Will get these fitted ASAP Also there are some slimline nuts for some 15mm hubcentric spacers for the rear :) Gonna have to get this fella out..! Quote Link to comment Share on other sites More sharing options...
Rich.2211 Posted February 20, 2014 Share Posted February 20, 2014 Glad you got the bolts mate, have fun Quote Link to comment Share on other sites More sharing options...
Zeiretto Posted February 21, 2014 Share Posted February 21, 2014 I love this build! Isn't it better to have a staggered wheel setup on a Supra though? Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted February 21, 2014 Share Posted February 21, 2014 Beautiful car! Keep the updates coming. If you fancy renting out your arch roller too i may be interested Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 21, 2014 Author Share Posted February 21, 2014 Glad you got the bolts mate, have fun Swear there are more than I need in here!! Lol seem to have a fair few spare! All about the little things! Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 21, 2014 Author Share Posted February 21, 2014 I love this build! Isn't it better to have a staggered wheel setup on a Supra though? Yeah I've heard that but I got these for a bargain!! Plus il be running spacers on the rear to stagger them I suppose! Quote Link to comment Share on other sites More sharing options...
rob_sri Posted February 21, 2014 Author Share Posted February 21, 2014 Beautiful car! Keep the updates coming. If you fancy renting out your arch roller too i may be interested Cheers bud I've subscribed to your project too, love it! Haha people are welcome to borrow it il let you know how I get on with it.. Number plate holder painted Quote Link to comment Share on other sites More sharing options...
ccssupra Posted February 21, 2014 Share Posted February 21, 2014 Did you used to be on Corsa C uk Rob? Think I remember your user name, I had a 1.8 SRi aswell. Lovely Supra btw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.