mplavery Posted December 29, 2013 Share Posted December 29, 2013 R34 had to go so I could buy a house Will definitely own another one soon though How's is the drive to the R34 from the supra just out of curiosity ? Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted December 29, 2013 Share Posted December 29, 2013 Not a fan of the pillar gauges, but otherwise I rally like what you've done with the interior Quote Link to comment Share on other sites More sharing options...
Ian. Posted February 20, 2014 Author Share Posted February 20, 2014 Just a small update. Been a bit busy over the last few months stock piling parts & getting the car into the right state to have some work done Trial fit of new spoiler (this time its staying ) Although I do have a spare boot lid being delivered so that i can alternate between the 2 options My Ridox bumper is currently at Whifbitz in Enfield so will hopefully be coming down next week Also picked up these and these Car was delivered to the new Whifbitz branch today to get these fitted along with a Syvecs Once Paul has done the first stage of fitting then the car is going for a colour change before going back to Whifbitz to get the map sorted Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 22, 2014 Share Posted March 22, 2014 Nie mate, any updates?!!! How's syvecs?! Quote Link to comment Share on other sites More sharing options...
Ian. Posted March 22, 2014 Author Share Posted March 22, 2014 Hi Greg Its currently at the body shop, went to check on it this morning & its pretty much ready to start painting it. They reckon end of next week it should be done. Cams, Injectors, Syvecs are all fitted. Should have the car back to Whifbitz to finish up by 5th April at the latest Cant wait to get it finished Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 23, 2014 Share Posted March 23, 2014 Hi Greg Its currently at the body shop, went to check on it this morning & its pretty much ready to start painting it. They reckon end of next week it should be done. Cams, Injectors, Syvecs are all fitted. Should have the car back to Whifbitz to finish up by 5th April at the latest Cant wait to get it finished Oh mate she's going to be beautiful. I miss her so damn much! Glad to see it's all coming along nicely. Keep us updated! Quote Link to comment Share on other sites More sharing options...
Ian. Posted March 24, 2014 Author Share Posted March 24, 2014 She might be up for sale later this year if my plan to go back to a R34 works out Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 26, 2014 Share Posted March 26, 2014 She might be up for sale later this year if my plan to go back to a R34 works out Mate if you are serious about that, and I am, please give me first refusal. That is all I ask! Quote Link to comment Share on other sites More sharing options...
Ian. Posted March 26, 2014 Author Share Posted March 26, 2014 Mate if you are serious about that, and I am, please give me first refusal. That is all I ask! You got it I'm 99% certain she will be for sale around September/October time. Will let you know Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 5, 2014 Author Share Posted April 5, 2014 Car is back from paint , New Engine mounts, Rear Upper arms on Monday, MOT on Tuesday, Mapping on Wednesday Front bumper had to be removed to get it back on the trailer. All being well should have her back late next week & she will probably be for sale shortly after Quote Link to comment Share on other sites More sharing options...
jimojameso Posted April 8, 2014 Share Posted April 8, 2014 Forgive me for being rude but why have changed this car so much if you plan to sell it soon after? It looked so good before. The chicken wire in the bonnet needs to be darker. Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 8, 2014 Author Share Posted April 8, 2014 Yes the bonnet mesh will change to black. I had every intention of keeping the car but tbh with everything thats gone on with it & the amount of delays & bullshit i've put up with since september i've had an absolute titsfull of it & just cant be arsed any more Quote Link to comment Share on other sites More sharing options...
Ric Posted April 8, 2014 Share Posted April 8, 2014 I like those ali dial surrounds in the first set of pictures, any idea where you can buy those? Or are they the MVP units? i was looking at the HC surround bezels. Quote Link to comment Share on other sites More sharing options...
The Raven Posted April 8, 2014 Share Posted April 8, 2014 What have you fitteed in the vent to stop water? I need to do something with mine Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 8, 2014 Author Share Posted April 8, 2014 I like those ali dial surrounds in the first set of pictures, any idea where you can buy those? Or are they the MVP units? i was looking at the HC surround bezels. I believe they are the MVP units What have you fitteed in the vent to stop water? I need to do something with mine Nothing yet, still trying to figure out the best way to do it. Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 10, 2014 Author Share Posted April 10, 2014 And shes nearly ready for pickup Don't have any exact dyno figures after mapping unfortunately, apparently something to do with the way the dyno at Indiblow GT (sorry, meant Indigo GT) works & they can't run any load through it so at 1 bar & 100% wastegate duty it made 330 rwhp so at 1.3 bar which is my max boost setting it should be around 450ish - I'll find out for certain in a few weeks when I take it to a competent dyno operator Bit disappointed with the estimated figures but meh, If I decide to keep it I'll just go single next winter Quote Link to comment Share on other sites More sharing options...
heedthebaw Posted April 10, 2014 Share Posted April 10, 2014 Oooohhh that looks good mate Quote Link to comment Share on other sites More sharing options...
Sheefa Posted April 12, 2014 Share Posted April 12, 2014 Looks good, like the front bumper I always wanted a Ridox, not keen on bonnet or stock wing but each to their own. When I ran it at Dynodaze Ian she was running flawlessly at about 330rwhp if I remember correctly too at 1 bar. I only did a couple of runs to check AFRs after a previous dodgy dyno print. Glad she's still running well. I am still interested in buying her back...... Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted April 12, 2014 Share Posted April 12, 2014 Nice car this! Quote Link to comment Share on other sites More sharing options...
DaveR Posted April 12, 2014 Share Posted April 12, 2014 Lovely looking car. Quote Link to comment Share on other sites More sharing options...
Mugello Posted April 12, 2014 Share Posted April 12, 2014 Wow What a stunner ! Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 12, 2014 Author Share Posted April 12, 2014 Looks good, like the front bumper I always wanted a Ridox, not keen on bonnet or stock wing but each to their own. When I ran it at Dynodaze Ian she was running flawlessly at about 330rwhp if I remember correctly too at 1 bar. I only did a couple of runs to check AFRs after a previous dodgy dyno print. Glad she's still running well. I am still interested in buying her back...... Make me an offer Nice car this! Lovely looking car. Wow What a stunner ! Thanks I've pretty much got it the way I want now, could just do with a little bit more power Spec list has changed quite a bit since I first bought it ****Exterior**** Ridox Front Bumper OEM Side Skirts Facelift Headlights Face Lift Tailights SRD Undertray Smoothed Rear Wiper Smoothed Aerial Smoothed Bootlid Clear Facelift Indicators 18" BBS LM Wheels Custom Vented Bonnet Aerocatch Bonnet Latches Fog Light Fitted Into Rear Light Cluster Xenon HID Kit TRD Fuel Cap Tinted Windows ****Interior**** Bride Euro II Seats Carbing Gear knob Nardi Personal Neo Grinta Steering Wheel ****Electronics**** HKS AFK Defi Control Unit Defi Boost Gauge Defi Oil Temperature Gauge Defi Oil Pressure Gauge Alpine SPS-171A Front Speakers Alpine SXE-1725S Rear Speakers Pioneer AVIC F940BT Headunit Pioneer TS-Wx77A" Amplified Subwoofer Syvecs S6 ECU Syvecs Knock Sensor Syvecs 3 bar Map Sensor Syvecs Boost Control Solenoid Syvecs Cal Switches (2) Syvecs Oil Pressure Sensor Syvecs Wideband Sensor Pivot Racing Push Start Button ****Engine**** Brian Crower 264 Stage 2 Cams Titan Motorsport Cam Gears Gates Cam Belt HKS SSQV Envy Decats HKS CF Ti Exhaust GReddy FMIC Walbro Fuel Pump Sard 800 CC Injectors Hybrid Turbos Blitz Panel Filter Whifbitz Radiator Carbon Fibre Slam Panel Carbon Fibre Spark Plug Cover Carbon Fibre Fuse Box Cover Carbon Fibre ABS Cover TRD Gold Oil Cap Whifbitz Radiator Cap Bonnet Dampers GReddy Expansion Tank Polished Inlet Manifold Polished Turbo Pipes Polished Hard Pipes ****Drivetrain**** OEM Clutch OEM Flywheel OEM Pressure Plate APE Aluminium Shifter Bushes ****Suspension**** Tein Flex Coilovers Cusco Carbon Fibre Front Strut Brace Cusco Carbon Fibre Rear Strut Brace ****Brakes**** UK Spec Front Brakes Rotora Front Disks CW Fast Road Pads UK SPec Rear Brakes OEM UK Rear Disks Goodrich Braided Hoses Will get a few new pics of it tomorrow once I've finished fitting the last few bits to it Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 13, 2014 Author Share Posted April 13, 2014 Finally back on the road after 9 months. I can however, feel the love for the car coming back I've spent most of today finishing off the few odd jobs that I had left & finishing off the wiring. I still have a few things left to sort out once my bank balance recovers, but they are not urgent She also needs a damn good wash Have a few pics, everyone loves pics The knobs of fun http://i665.photobucket.com/albums/vv13/ian350z_photos/My%20Supra/IMG_0883_zps581f0aa3.jpg Quote Link to comment Share on other sites More sharing options...
thetrashcanman Posted April 13, 2014 Share Posted April 13, 2014 Assuming the car didn't have cam's in already when you took it to whifbitz mate? Quote Link to comment Share on other sites More sharing options...
Ian. Posted April 13, 2014 Author Share Posted April 13, 2014 Nah, cams were stock Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.