cje001 Posted July 22, 2013 Share Posted July 22, 2013 Hi all Developed a problem today with the clutch peddle staying planted to the floor when engaging first and having to pull it back up with my toes... The car then will engage 2nd, 3rd etc but once you come to a stop and engage first slowly it goes to the floor again... Just out of interest if you do a very fast engage of 1st it will spring back up.... Clutch fluid was on min level... I`ve spoken to a few garages and looked on here and it sounds like the master clutch cylinder or the slave have gone... The questions i have are as follows: 1) Are the master and slave clutch cylinders the same on imports and uk spec cars, i have a part number of 31410-24050 for the master cylinder? 2) How much should these be and how long to replace? Many thanks, Chris Quote Link to comment Share on other sites More sharing options...
fastcar Posted July 23, 2013 Share Posted July 23, 2013 Not sure if the master and slave cylinders are the same for uk and J spec I should think they are. But you can get rebuild kits for both master and slave cylinder that consist of new seals and springs from what I can remember. They are available from Toyota for something like £10-£15 and very easy to fit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.