Samurai 20V Posted July 19, 2013 Share Posted July 19, 2013 (edited) Hi. I have just installed the Aem water injection kit in my BPU.. I want to confirm the normal operation of the Led. At times, on WOT at 1.2bar, the led will change from a steady glow (with changing intensity) to flashing continuously at a fast pace... There are no errors coming up in normal operation, if I use low boost, it does not flash, just lights up steadily. Is this normal operation for the system? I don't have the flow gauge installed so I am unsure if this is causing flow stop. Here is a video.. The beeping is the DEFI boost gauge signalling over 1.1bar.. http://s155.photobucket.com/user/Rajeevjagath/media/IMG_0407_zps3f34d4af.mp4.html Any help would be appreciated. Thanks. Edited July 21, 2013 by Samurai 20V Video added (see edit history) Quote Link to comment Share on other sites More sharing options...
Fly Posted July 19, 2013 Share Posted July 19, 2013 Are you running the boost safe controller too? Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted July 19, 2013 Author Share Posted July 19, 2013 You mean the failsafe device? Not running that.. And the boost safe wire is not hooked up, not sure on the wiring for that as yet.. Quote Link to comment Share on other sites More sharing options...
Fly Posted July 19, 2013 Share Posted July 19, 2013 I've only started looking into the AEM range but let me dig through all the info I downloaded. Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted July 19, 2013 Author Share Posted July 19, 2013 I've only started looking into the AEM range but let me dig through all the info I downloaded. Appreciate it mate.. Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted July 21, 2013 Author Share Posted July 21, 2013 VIdeo Added.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.