Brothy Posted July 8, 2013 Share Posted July 8, 2013 I currently have a toad imobiliser installed on the car, its basically a fob i have on my keys which i have to touch on a receiver on the dash. I need to remove the dash pannel that the receiver is fixed to. I cant remove the pannel without cutting the wires from the receiver. If i cut the the wires will i be facing consequences that the car will not start once the wires are re-connected ? Link to comment Share on other sites More sharing options...
Iky Posted July 8, 2013 Share Posted July 8, 2013 Is it a cobra alarm? Link to comment Share on other sites More sharing options...
listy Posted July 8, 2013 Share Posted July 8, 2013 Iky said: Is it a cobra alarm? 5th word in OP.....toad Could you not bridge the wires before cutting? Then it would keep it as a full circuit. Link to comment Share on other sites More sharing options...
Iky Posted July 8, 2013 Share Posted July 8, 2013 Sorry, missed that bit Should be fine after you reconnect it. It's just a socket. If it's what i'm thinking of, I have a similar Cobra one. With things called "Touchkeys" They only de-activate the immobiliser if i don't start the car within say 1 minute of unlocking the doors using the fob, although the touch keys are not needed to start the car- I just press the button on my fob that i used to unlock the doors and it does does the same job. - realised this after about a month Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now