ashbuster Posted June 15, 2013 Share Posted June 15, 2013 didnt quite think this through my plans were to remove my engine with the crane and take it to the back garden where my stand will be but how the hell do i get through the gate the crane is too wide and so is the stand Quote Link to comment Share on other sites More sharing options...
safcdixon Posted June 15, 2013 Share Posted June 15, 2013 Strip what you can off it and get a mate to help you carry it they aint that heavy once most of the ancillaries are off Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 any ideas how much it weighs with the turbos and manifold stripped off bud? but means i would have to rebuild it all on the front garden which i wanted to avoid would be more hassle any ideas where i could buy an engine stand thats not wider than 78cm Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 15, 2013 Share Posted June 15, 2013 pay to get geo to come down lol he will lift it over the fence as it is Quote Link to comment Share on other sites More sharing options...
LOGIE Posted June 15, 2013 Share Posted June 15, 2013 lower the engine onto a small trolley..., or "borrow" a supermarket trolley or remove the gate/gate post or get Geo to throw it over your house into the back garden. EDIT; Rob had similar idea just quicker than me. Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 ive found some trolleys i could use but need to know the weight of the engine with gearbox off but everything else intact Quote Link to comment Share on other sites More sharing options...
LOGIE Posted June 15, 2013 Share Posted June 15, 2013 Weight of parts HERE 270kg with turbos Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 thanks bud didnt expect to see a thread on here about weights lol 270kg the tt engine, i thought it would have been a heap load more 500kg plus is that weight with all the turbo side on and the manifold ect.. if thats the weight of the whole lot then it shouldnt be a problem Quote Link to comment Share on other sites More sharing options...
skyline1 Posted June 15, 2013 Share Posted June 15, 2013 Pull the fence down. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted June 15, 2013 Share Posted June 15, 2013 thanks bud didnt expect to see a thread on here about weights lol 270kg the tt engine, i thought it would have been a heap load more 500kg plus is that weight with all the turbo side on and the manifold ect.. if thats the weight of the whole lot then it shouldnt be a problemyep 270kg is total mate. I too initially thought it was much heavier esp when I had to manually get it off the trailer when I got it home from jurgens without a crane. I WAS SWEATING. Quote Link to comment Share on other sites More sharing options...
safcdixon Posted June 15, 2013 Share Posted June 15, 2013 I moved my old rst engine on a car sneaker no problem, quite a bit smaller than a jz though Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 lol i cant mate its Cotswold stone wall and the other side is my house - - - Updated - - - yep 270kg is total mate. I too initially thought it was much heavier esp when I had to manually get it off the trailer when I got it home from jurgens without a crane. I WAS SWEATING. thanks bud Quote Link to comment Share on other sites More sharing options...
Dnk Posted June 15, 2013 Share Posted June 15, 2013 (edited) Hire a big crane and lift it over the house Edited June 15, 2013 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 lol Quote Link to comment Share on other sites More sharing options...
Kaan W Posted June 15, 2013 Share Posted June 15, 2013 Make a sledge and drag it? Quote Link to comment Share on other sites More sharing options...
ashbuster Posted June 15, 2013 Author Share Posted June 15, 2013 should be fine mate not as heavy as i thought Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.