ManwithSupra Posted June 12, 2013 Share Posted June 12, 2013 Hi All, After removing my propshaft the other day I need to remove the rubber donut before I send it off for checking but it wont seem to come off. Does anyone have any suggestions? tips/tricks. https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/954684_473345536073428_395543248_n.jpg Link to comment Share on other sites More sharing options...
mellonman Posted June 12, 2013 Share Posted June 12, 2013 Hammer ? Link to comment Share on other sites More sharing options...
bignum Posted June 12, 2013 Share Posted June 12, 2013 Use a large flat blade screwdriver or metal chissel behind the flange, tap it in with a hammer, also give a squirt of wd40 beforehand, its the bushes in the donut seize into the flange. Link to comment Share on other sites More sharing options...
chazuk Posted June 13, 2013 Share Posted June 13, 2013 Where are you sending the prop to ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now