Auto TT to R154: This is how to modify the propshaft! pictures

[mihai]

I have both of the props in image, the one with blue is a TT J-spec, and the red is the front patrt of a W58 that fits a R154 gearbox.

You have to swap the final part ( in red) and fit it to the J-spec TT, (I am not sure if is diference with a UK-spec TT)

Is a very hard work if you do it your self, but a easy job for a profesional witch is recomanded!

The propshaft fits with the R154 box and the J-spec diff, It was not driven yet.

I will upload a photo of the 2 propsshaft´s put together when i have it in my pc.

this is my r154 gearbox kit: Is now mounted to the 2jz engine:

Thank you!

You don´t have to cut and weld like this....

I hope it helps somebody:D Mihai.

Edited June 11, 2013 by mihai (see edit history)

[David P]

Use the rear section of an N/A prop.

[mihai]

I have recived this in my kit, It will be easy but i can´t get one i am in spain:(

[David P]

I'm sure someone with one over here could work up the enthusiasm to lick a stamp, I might even have one lurking at the Workshop?

[bigbloodyturbo]

has anyone actually done a step by step guide with photos on how to do this swap including the shifter extension etc. Would be an awesome sticky although I'd guess it would push the price of R154's up even further.

[WildFiresupra]

has anyone actually done a step by step guide with photos on how to do this swap including the shifter extension etc. Would be an awesome sticky although I'd guess it would push the price of R154's up even further.

 

 

I'd like to see a guide like this too!.. Would be very useful for the future when I get a TT!