welshbuddy Posted May 17, 2013 Share Posted May 17, 2013 im getting fly wheel off , there like a star shaped bolts right, is there a special tool to get them out? or am i right in thinking same as rest of bolts? daz Link to comment Share on other sites More sharing options...
ballsdeep Posted May 17, 2013 Share Posted May 17, 2013 I think there 12 sided 14mm if I remember correctly? Link to comment Share on other sites More sharing options...
welshbuddy Posted May 17, 2013 Author Share Posted May 17, 2013 thankyoou much apreciated Link to comment Share on other sites More sharing options...
welshbuddy Posted May 17, 2013 Author Share Posted May 17, 2013 ok the engine is out of car, im trying to turn the flywheel bolts but then the crank pulley spins! any ideas how to stop it spinning ? while i undo bolts Link to comment Share on other sites More sharing options...
RobUK Posted May 17, 2013 Share Posted May 17, 2013 Put a socket and bar on the crank pulley and hold that whilst undoing the flywheel. Link to comment Share on other sites More sharing options...
welshbuddy Posted May 17, 2013 Author Share Posted May 17, 2013 cheers ill have to wait to dad comes home then haha, tah Link to comment Share on other sites More sharing options...
ballsdeep Posted May 17, 2013 Share Posted May 17, 2013 Or Screw driver/pry bar on the ring gear of the flywheel is the bodge it way.. Link to comment Share on other sites More sharing options...
RobUK Posted May 17, 2013 Share Posted May 17, 2013 cheers ill have to wait to dad comes home then haha, tah If you have a long enough bar it can brace against the sub frame... Link to comment Share on other sites More sharing options...
welshbuddy Posted May 17, 2013 Author Share Posted May 17, 2013 engine is out of car, its just on the drive with flywheel connected Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2013 Share Posted May 17, 2013 If you have a small breaker bar use a copper or similar mallet/hammer to crack the bolts then you wont need to lock up the crank Link to comment Share on other sites More sharing options...
welshbuddy Posted May 17, 2013 Author Share Posted May 17, 2013 ahhh cheers for the advice bro! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now