absz Posted September 25, 2016 Share Posted September 25, 2016 Is the 02 feedback reading correct now or do you still have issues? Also on throttle setup you need to see at least 1% throttle open when the pedal is at resting position if it reads 0% you will have idle issues and hesitation when pull away Link to comment Share on other sites More sharing options...
Kev.O Posted September 25, 2016 Author Share Posted September 25, 2016 Hi Absz, O2 feedback is fine now thank you. I take it the 1% throttle will need to be set up in the software? I've calibrated the throttle before but not done any percentage related changes before. Link to comment Share on other sites More sharing options...
absz Posted September 25, 2016 Share Posted September 25, 2016 Yes you need to change the MIN voltage.increase the voltage by about 0.5volts and that should see a increase in throttle position. you can play around with the voltage to see how car idles anything from 1-1.5% throttle should be fine. It makes a huge difference on how smooth the car idles and performs when lifting off throttle whilst driving Link to comment Share on other sites More sharing options...
Kev.O Posted September 25, 2016 Author Share Posted September 25, 2016 Do you think this will sort the lean issue when the throttle is blipped? Will get the laptop out and have a look this week, thank you. Link to comment Share on other sites More sharing options...
absz Posted September 25, 2016 Share Posted September 25, 2016 yes it did on mine:) Link to comment Share on other sites More sharing options...
Kev.O Posted September 25, 2016 Author Share Posted September 25, 2016 Perfect thanks Absz. Link to comment Share on other sites More sharing options...
Kev.O Posted October 9, 2016 Author Share Posted October 9, 2016 Absz, which heading is this under? Link to comment Share on other sites More sharing options...
Kev.O Posted October 9, 2016 Author Share Posted October 9, 2016 I've taken several videos of the AEM screen if this is of any benefit, I can email or whatsapp them if anyone is interested Link to comment Share on other sites More sharing options...
absz Posted October 9, 2016 Share Posted October 9, 2016 Setting the minimum voltage for TPS is as follows Go to SETUP - SENSORS - THROTTLE POSTION SENSOR- OPTION TPS- and set minimum voltage from 0.00v to approx. 0.33v that should give you a about 1-1.5% on closed throttle position you can send me screen shots on whatsapp 07834 338861:) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now