_Shane_ Posted April 29, 2013 Share Posted April 29, 2013 Hi All, As a follow up to my wastegate thread issue i had recently i seem to notice another small issue with my car at the moment The car is still running stock ecu, its waiting to be dropped of for AEM ecu to be fitted and mapping so i dont know if this will sort the idling issue On my last single turbo setup i had a feed coming off the intake manifold going to the wastegate on the turbo kit etc, this time round on the T51 kit having the same feed going to the wastegate seemed to give me trouble with the wastegate staying open etc I resolved that matter last week by having a feed tapped into the intercooler pipework straight off the turbo etc This fixed my wastegate problem Now the new issue i noticed, the car idling ..... I forgot to block off a feed on the intake manifold and noticed this after i had the car running, when i stuck my finger over the feed the cars idle dropped straight away and the car seemed to struggle to stay ticking over .... but when i left the feed open the car ticked over without struggling and didnt feel like it was going to cut out (only thing here was the idle was a bit more than normal) Any ideas guys? Quote Link to comment Share on other sites More sharing options...
mellonman Posted April 30, 2013 Share Posted April 30, 2013 properly just the stock ecu fuel trims, dis conect the battery and block hole then start again should be okay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.