adarmo Posted April 26, 2013 Share Posted April 26, 2013 Hi, My Supra currently has a Veilside nosecone on it and I want to swap it back to OEM. I have an OEM nosecone but before I remove the veilside I wondered if anyone could tell me if I'm likely to need any other parts as I'd like to do it in one go rather than have the car off the road. If anyone has any pics so I can see what should be there that would be great. I'm thinking bumper reinforcing strips, plastic ducting any special fixings etc Thanks Link to comment Share on other sites More sharing options...
listy Posted April 26, 2013 Share Posted April 26, 2013 There should be a metal strip either side where the bumper attaches to the wing. There should be a polystyrene insert in the oem front bumper. You should have a crash bar (sometimes removed when an aftermarket front is fitted) There should also be an oem undertray iirc. I think that's it. Someone else will add if there is anything more. Link to comment Share on other sites More sharing options...
adarmo Posted April 27, 2013 Author Share Posted April 27, 2013 Thanks I'll have a look at the bumper and car to see what's there / missing Link to comment Share on other sites More sharing options...
adarmo Posted April 28, 2013 Author Share Posted April 28, 2013 Had a good look today. What fits around the mouth / rad intake of the bumper ? Mine has holes top and bottom and nothing to fit to. Is all that holds the bumper on the two side strips and the top strip by the rad ? Doesn't seem much Link to comment Share on other sites More sharing options...
listy Posted April 28, 2013 Share Posted April 28, 2013 Had a good look today. What fits around the mouth / rad intake of the bumper ? Mine has holes top and bottom and nothing to fit to. Is all that holds the bumper on the two side strips and the top strip by the rad ? Doesn't seem much Yep. That's it mate. Not sure what the holes in the mouth of the bumper are for. Possibly custom number plate brackets at some point. Link to comment Share on other sites More sharing options...
straightsix Posted April 28, 2013 Share Posted April 28, 2013 Upper holes are for plastic clips that press into the bottom of the crash bar and the lower holes are for a reinforcement strip. Link to comment Share on other sites More sharing options...
listy Posted April 28, 2013 Share Posted April 28, 2013 Upper holes are for plastic clips that press into the bottom of the crash bar and the lower holes are for a reinforcement strip. There you go Link to comment Share on other sites More sharing options...
straightsix Posted April 28, 2013 Share Posted April 28, 2013 This might help: Link to comment Share on other sites More sharing options...
adarmo Posted April 28, 2013 Author Share Posted April 28, 2013 Thanks for the help. Link to comment Share on other sites More sharing options...
listy Posted April 28, 2013 Share Posted April 28, 2013 This might help: [ATTACH=CONFIG]168479[/ATTACH] Front bumper and BUM Kid moment Link to comment Share on other sites More sharing options...
straightsix Posted April 28, 2013 Share Posted April 28, 2013 Front bumper and BUM Kid moment You weren't the only one dude! Link to comment Share on other sites More sharing options...
listy Posted April 28, 2013 Share Posted April 28, 2013 you weren't the only one dude! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now