markssupra Posted November 15, 2013 Author Share Posted November 15, 2013 This turned up in the post today, nice shiny Snap-On TechWrench digital Torque wrench, thought I would treat the engine to some proper nut tightening Apparently it also makes tea. Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted November 15, 2013 Share Posted November 15, 2013 That is absolute porn, ow, i have a nice brand new Aventador start button here for you mark, would finish it off Link to comment Share on other sites More sharing options...
markssupra Posted November 15, 2013 Author Share Posted November 15, 2013 That is absolute porn, ow, i have a nice brand new Aventador start button here for you mark, would finish it off Pics please Dane, might be interested Link to comment Share on other sites More sharing options...
markssupra Posted November 15, 2013 Author Share Posted November 15, 2013 Update from Rob. Body being sanded back, filler work started in places... Dings being attended to. Not a bad body Link to comment Share on other sites More sharing options...
thetrashcanman Posted November 15, 2013 Share Posted November 15, 2013 Update from Rob. Body being sanded back, filler work started in places... Dings being attended to. Not a bad body http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177097&stc=1&d=1384530362 No way did Rob take that picture Looking good Mark, bet you can't wait to get her back already Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted November 16, 2013 Share Posted November 16, 2013 Unfortunately it does not include the surround, its fixed on the total centre console (unless you want to pay $2400) I can also get any other parts, incl rubber start buttons which the Gallardo Super Trofeo has. https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/1464687_650707194973258_2126715860_n.jpg https://scontent-b-ams.xx.fbcdn.net/hphotos-prn2/1459214_650707204973257_1364074456_n.jpg https://scontent-b-ams.xx.fbcdn.net/hphotos-frc3/1463602_650707218306589_1779411154_n.jpg Link to comment Share on other sites More sharing options...
markssupra Posted November 16, 2013 Author Share Posted November 16, 2013 Mmmm! Thanks Dane, will let you know when I'm nearer to needing it. Link to comment Share on other sites More sharing options...
Homer Posted November 16, 2013 Share Posted November 16, 2013 Rob isn't hanging around on this then, fast work! Link to comment Share on other sites More sharing options...
markssupra Posted November 19, 2013 Author Share Posted November 19, 2013 (edited) Few more pics of the cars progress at DAW. Looking good Rob Edited November 19, 2013 by markssupra (see edit history) Link to comment Share on other sites More sharing options...
drift_bear Posted November 19, 2013 Share Posted November 19, 2013 Been watching robs progress on Facebook, he is cracking on with this a good pace! Link to comment Share on other sites More sharing options...
Josh Posted November 19, 2013 Share Posted November 19, 2013 Thought it was going the be red, not yellow and green Good progress guys! Link to comment Share on other sites More sharing options...
Westy Posted November 19, 2013 Share Posted November 19, 2013 As above...watching this develop on FB. Can't wait to see the colour laid down. Link to comment Share on other sites More sharing options...
Parry_10 Posted November 19, 2013 Share Posted November 19, 2013 Looking good, will be really nice when its done. Going by that last pic rob has aged a lot he even has grey hair now :O Link to comment Share on other sites More sharing options...
markssupra Posted November 20, 2013 Author Share Posted November 20, 2013 (edited) Looking good, will be really nice when its done. Going by that last pic rob has aged a lot he even has grey hair now :O Lol. Thanks all, cant wait to see this finished. Robs moving on with this at a cracking pace, wish I had the time to work this fast I'd better start ordering some more parts :O Shell all primed and guide coated. Edited November 20, 2013 by markssupra (see edit history) Link to comment Share on other sites More sharing options...
Kaan W Posted November 20, 2013 Share Posted November 20, 2013 Wow he does work fast! Not long now I suspect for the top coat it's gunno look awesome mate. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 20, 2013 Share Posted November 20, 2013 Lol thats Steve in the pic! bodywork guru and one of the best in the trade. Colour is all ordered, no idea on cost but ill make sure your sitting down before i text. Its a 3 stage paint, middle paint is translusant so i guess all the colours are in the base. Going to be stunning Link to comment Share on other sites More sharing options...
Iky Posted November 22, 2013 Share Posted November 22, 2013 Any updates on this? I want to see more! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 22, 2013 Share Posted November 22, 2013 Any updates on this? I want to see more! Just rubbing down stage at my end, colour will arrive monday and tuesday! should have door shuts ect and bay painted by next week Link to comment Share on other sites More sharing options...
markssupra Posted November 25, 2013 Author Share Posted November 25, 2013 Managed to get a few more bits done while the cars away at DAW. Had all the front suspension arms and subframe parts powdercoated or shotblasted. Tidied up the front hubs and checked the bearings. Started installing all the new R2 bushes. Should manage to get the front suspension completely rebuilt by the time the cars back from DAW, and get it back on the car so its off the garage floor. Link to comment Share on other sites More sharing options...
drift_bear Posted November 25, 2013 Share Posted November 25, 2013 Looking good bud Link to comment Share on other sites More sharing options...
Kaan W Posted November 25, 2013 Share Posted November 25, 2013 Wish I had time to refurbish my subframe before the engine goes in, they will make all the difference when they're finished good work! Link to comment Share on other sites More sharing options...
Iky Posted November 25, 2013 Share Posted November 25, 2013 Managed to get a few more bits done while the cars away at DAW. Had all the front suspension arms and subframe parts powdercoated or shotblasted. Tidied up the front hubs and checked the bearings. Started installing all the new R2 bushes. Should manage to get the front suspension completely rebuilt by the time the cars back from DAW, and get it back on the car so its off the garage floor. http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177555&stc=1&d=1385374465 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177556&stc=1&d=1385374465 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177557&stc=1&d=1385374677 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177558&stc=1&d=1385374677 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=177559&stc=1&d=1385374677 Wow, those suspension arms came out alright didn't they. Whats that you're pressing into the arm? Does the bush kit require some sort of sleeve to be pressed in? Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 25, 2013 Share Posted November 25, 2013 Mark you need this diffuser bro!! fresh lick of paint and the arse end will look mustard mate! Link to comment Share on other sites More sharing options...
markssupra Posted November 27, 2013 Author Share Posted November 27, 2013 Wish I had time to refurbish my subframe before the engine goes in, they will make all the difference when they're finished good work! This was a job I was planning to do a while back but never got round to it, I rebuilt the rear suspension about 3 years ago and that made a big difference. Wow, those suspension arms came out alright didn't they. Whats that you're pressing into the arm? Does the bush kit require some sort of sleeve to be pressed in? Very pleased with the finish on them, better than I expected tbh. Thats one of the outer steel sleeves, then the poly bush goes in and finally the inner steel bush. Pretty easy to do as long as its all clean. Mark you need this diffuser bro!! fresh lick of paint and the arse end will look mustard mate! I'm still not sure if I want it mate, I will look at it again when the paints on the car Inner steel bush going inside the polybush. Regreasing the ball joints after a very thorough clean, then fixing the boot with a wire wrap. Upper arm bushes installed and ready to fit. Link to comment Share on other sites More sharing options...
drift_bear Posted November 27, 2013 Share Posted November 27, 2013 Can't wait to see the car with its new paint on dude Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now