DJT88 Posted April 22, 2013 Share Posted April 22, 2013 Hi all, I've been experiencing some weird problems with my TT lately. I thought I fixed it with a new O2 sensor but the issue remains. This morning I tracked the probable cause down to a split vac hose. Unfortunately this seems to be on of the most difficult hoses to reach. You can see the split in this picture. If my research was correct this(and the one next to it) runs to the pressure tank. How on earth do I replace this??! Is the pressure tank reachable from below (on a ramp)? Any tips would be great. Quote Link to comment Share on other sites More sharing options...
DJT88 Posted April 22, 2013 Author Share Posted April 22, 2013 FOUND something!! so there should be a hard line down there Quote Link to comment Share on other sites More sharing options...
ashbuster Posted April 22, 2013 Share Posted April 22, 2013 that looks like its going to be a real pain in the ass to get to Quote Link to comment Share on other sites More sharing options...
DJT88 Posted April 22, 2013 Author Share Posted April 22, 2013 (edited) I finally managed to get to it by removing the pipes to the Idle Air Control Valve. But even then it was a real PITA! Lets hope I never have to do this again. It seems to have done the trick though. But I still need to get my car tuned properly. Idle air hose: Edited April 22, 2013 by DJT88 (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.