viper Posted April 19, 2013 Share Posted April 19, 2013 Iv got the diagrams but wanted people's opinion on how they would so it. Currently iv got the top waist gate vac takeoff going to the avcr boost solinoid then the solinoid to the intercooler pipe work just after the turbo. The lower waist gate vac pipe attaches to the top vac pipe after the boost solinoid That's not right is it? Link to comment Share on other sites More sharing options...
ashbuster Posted April 19, 2013 Share Posted April 19, 2013 shouldnt the one from the solenoid go to the turbo one to turbo source one to wastegate Link to comment Share on other sites More sharing options...
ashbuster Posted April 19, 2013 Share Posted April 19, 2013 (edited) Connect the vacuum line from the waste-gate to the “COM” side of the solenoid, and Connect the vacuum line from the turbo to the “ON” side of the solenoid. Edited April 19, 2013 by ashbuster (see edit history) Link to comment Share on other sites More sharing options...
viper Posted April 19, 2013 Author Share Posted April 19, 2013 Yep that's how it's done at the moment Link to comment Share on other sites More sharing options...
viper Posted April 19, 2013 Author Share Posted April 19, 2013 There's no take off on the turbo itself so iv taken it off the inlet pipe work just after the turbo. Is this ok? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now