girth45 Posted April 12, 2013 Share Posted April 12, 2013 Hi to all, i am looking to make a tool for holding bottom pulley so bolt can be undone, if any one has a bottom pulley of there car or loose, i need some dimensions, hole centres for the tool to bolt to pulley. thread size of these holes. internal dimensions of pulley where bolt sits, i hope you all know what i mean, this may well have been anwered in other threads, but please if poiss answer to this thread. many thanks. Link to comment Share on other sites More sharing options...
SPG Posted April 12, 2013 Share Posted April 12, 2013 Have a little look here http://www.mkivsupra.net/vbb/showthread.php?272432-Tools-needed-to-remove-crankshaft-pulley-(buy-or-borrow)&highlight=crank+pulley+tool Link to comment Share on other sites More sharing options...
trebor69 Posted April 12, 2013 Share Posted April 12, 2013 I fashioned one from a piece of iron and you are welcome to use it if you like ....I have some bolts too ....I am in swadlincote which isn't too far away from you I think ? PM me if you like Rob. Link to comment Share on other sites More sharing options...
Josh42 Posted April 12, 2013 Share Posted April 12, 2013 I just dropped the car in gear and locked the cams up that way:) Link to comment Share on other sites More sharing options...
trebor69 Posted April 12, 2013 Share Posted April 12, 2013 I only made the tool up to tighten the bolt up again , to get it undone I put a bar and socket on the bolt rested on the ground , held in place by myself whilst my girlfriend gave it the quickest flick of the ignition and hey presto ....worked a treat, 1st time and very easy Link to comment Share on other sites More sharing options...
listy Posted April 12, 2013 Share Posted April 12, 2013 I only made the tool up to tighten the bolt up again , to get it undone I put a bar and socket on the bolt rested on the ground , held in place by myself whilst my girlfriend gave it the quickest flick of the ignition and hey presto ....worked a treat, 1st time and very easy Same way I got mine off Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now