HELP!! nut type/size on A/T flange to prop shaft

[Pedroby]

Tried a few local Toyota dealers but they all seem to see water burning when I ask them for a simple nut and dont have a chassis number for them as my car has undergone a GE---> GTE swap.

 

What I need are the nuts to connect the propeller shaft on the flange of the auto gearbox on a Supra GTE gear box.

Seems quite easy to me, also as I can find pics of it easily in the manual.

But after I tried different type of nuts, I still haven't found the right ones!

 

I already tried M12, M12 x 1.25 but both were not the right ones. They seem to fit, but when you try to tighten them, the nuts come loose. And no my tread is not damaged

 

Please help me out what nut size and type I need!!

[Pedroby]

Nobody??

[leeg]

have you tried the equivalent and af size? may not be metric?

[supra900bhp]

Hi there

 

I have had a word with my toyota dealer and for the 2jz-gte gearbox the part number for them nuts should be T90179-11017 x4 or however many your after and he said should be around the £2.13 each mark

 

hope it sorts you out???

[David P]

I have a new set you can have for £10 inc P&P?

[Chris Wilson]

You must use the correct nuts AND the correct ground and hardened washers. Otherwise it WILL come loose. I don't have the part numbers, but they are the same on ALL six speed MKIV's. You need to find a proper Toyota parts department, I finally trained mine to be pretty good and efficient