Tsia Posted April 4, 2013 Share Posted April 4, 2013 Hi all, Posted this in the NA-T club section, along with bit of a search but haven't found a crystal clear answer - Does anybody know the list of parts requires to fit the TT intake manifold onto an NA? Or is it just easier to buy an aftermarket front facing manifold? Cheers Quote Link to comment Share on other sites More sharing options...
d-_-b Posted April 4, 2013 Share Posted April 4, 2013 (edited) Dependant on the way you go about it determines what parts are required: Method 1. N/A lower runners meet TT upper runners: 'Cut N/A lower runners/cut the TT upper runners, attempt to make them fit together at the cut points'. Required: TT throttle cable TT throttle body TT plenum TT upper runners N/A lower runners Method 2. Modify TT plenum onto N/A upper runners: 'Make the N/A upper runners line up with the TT plenum'. Required: TT throttle cable TT throttle body TT plenum N/A upper runners N/A lower runners Method 3. Modify TT lower runners onto N/A head: 'Modify the TT lower runners to line up with the N/A head incl. bolting points'. Required: TT throttle cable TT throttle body TT plenum TT upper runners TT lower runners Edited April 4, 2013 by d-_-b (see edit history) Quote Link to comment Share on other sites More sharing options...
Dan_Turism0 Posted April 4, 2013 Share Posted April 4, 2013 will you not require a TT throttle cable too? Quote Link to comment Share on other sites More sharing options...
d-_-b Posted April 4, 2013 Share Posted April 4, 2013 will you not require a TT throttle cable too? Quite correct Dan, Is required for all 3 - 1st post updated. Quote Link to comment Share on other sites More sharing options...
Tsia Posted April 4, 2013 Author Share Posted April 4, 2013 Thanks! Quote Link to comment Share on other sites More sharing options...
Tsia Posted April 5, 2013 Author Share Posted April 5, 2013 Does anybody have pictures of lower runners of a TT intake manifold at all? Just so I can compare the two and see how much would need to be modified Quote Link to comment Share on other sites More sharing options...
Pulley Posted April 6, 2013 Share Posted April 6, 2013 The na runners are all inline, the tt centre runners are out of line as you can see Also the injector spacing is different The na runners and tt plenum as you can see will bolt up together but don't align properly so need extensive modding to mate up The time and effort I put into doing my na runner-tt plenum conversion would've about the same as me making my own runners and custom plenum Take a look at my build thread - - - Updated - - - To show clearly just get the metal na gasket and hold it to the tt plenum Quote Link to comment Share on other sites More sharing options...
Tsia Posted April 11, 2013 Author Share Posted April 11, 2013 Completely forgot I made this thread, I was just referring back to it now that I've got all of the parts in. Looks like this bit is going to be a bugger. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.