TubbyTwo Posted April 3, 2013 Share Posted April 3, 2013 Hi folks, Does anyone know of a company that makes a single hose that replaces the stock one circled in this picture? I have now gone through 2 OEM rubber hoses, the last one split due to the cold in the flexi joint when moving the air box about to remove a headlight. I'm sure I have seen one before, but the likes of Samco don't appear to list anything. Any help would be great. Si. Link to comment Share on other sites More sharing options...
mattdavies Posted April 3, 2013 Share Posted April 3, 2013 I would be interested in this, the other option is two silicon elbows and metal pipe Link to comment Share on other sites More sharing options...
TubbyTwo Posted April 3, 2013 Author Share Posted April 3, 2013 I would be interested in this, the other option is two silicon elbows and metal pipe Looked at that option as a possible, but more places to to get an air leak. Link to comment Share on other sites More sharing options...
Kaan W Posted April 3, 2013 Share Posted April 3, 2013 Looked at that option as a possible, but more places to to get an air leak. It should be pretty air tight, although if anything air would leak into the pipe under boost. Link to comment Share on other sites More sharing options...
ashbuster Posted April 3, 2013 Share Posted April 3, 2013 use mikalor clamps Link to comment Share on other sites More sharing options...
Dan_Turism0 Posted April 3, 2013 Share Posted April 3, 2013 surely wouldn't cost much for someone to fab one up? Link to comment Share on other sites More sharing options...
safcdixon Posted April 3, 2013 Share Posted April 3, 2013 A leak there wouldnt really matter anyway as its not part of the pressurised part of the cooler system Link to comment Share on other sites More sharing options...
Mugello Posted April 3, 2013 Share Posted April 3, 2013 A leak there wouldnt really matter anyway as its not part of the pressurised part of the cooler system This ^ But a big split would let in un-filtered air. Link to comment Share on other sites More sharing options...
mplavery Posted April 3, 2013 Share Posted April 3, 2013 use mikalor clamps I don't like these at all, I have a load of these and personally prefer a good old jubilee clip I looked in getting me of these too, if someone can do a silicone replica of the OEM one I would be very interested Link to comment Share on other sites More sharing options...
Kaan W Posted April 3, 2013 Share Posted April 3, 2013 I don't like these at all, I have a load of these and personally prefer a good old jubilee clip I looked in getting me of these too, if someone can do a silicone replica of the OEM one I would be very interested Could you not use something like this - http://compare.ebay.co.uk/like/150899161386?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0 Im sure the oem hose is more than strong enough and this will give it the looks. Edit: Or this - http://www.sfsperformance.co.uk/tape.asp Link to comment Share on other sites More sharing options...
ashbuster Posted April 3, 2013 Share Posted April 3, 2013 that would be terrible Link to comment Share on other sites More sharing options...
Kaan W Posted April 3, 2013 Share Posted April 3, 2013 that would be terrible I have no experience with this product I just assumed it was for a decorative appearence. Link to comment Share on other sites More sharing options...
listy Posted April 3, 2013 Share Posted April 3, 2013 Could you not use something like this - http://compare.ebay.co.uk/like/150899161386?var=lv Im sure the oem hose is more than strong enough and this will give it the looks. Edit: Or this - http://www.sfsperformance.co.uk/tape.asp The oem hose cracks at the ends, so not really strong enough now they are pushing 20 years old. Mine has started to crack, but not causing a problem yet. Will keep an eye on this thread for options. Link to comment Share on other sites More sharing options...
spikedjack Posted April 3, 2013 Share Posted April 3, 2013 Hks hard piping is the solution Link to comment Share on other sites More sharing options...
Kaan W Posted April 3, 2013 Share Posted April 3, 2013 The oem hose cracks at the ends, so not really strong enough now they are pushing 20 years old. Mine has started to crack, but not causing a problem yet. Will keep an eye on this thread for options. I meant new oem hose. Link to comment Share on other sites More sharing options...
Dnk Posted April 3, 2013 Share Posted April 3, 2013 (edited) I had a silicon hose made for this along with a custom made hard pipe but that was to fit the uk spec maf, i used mikalor clamps and never had a problem. Their way better than thin jubilee style clamps that cut into the hose Edited April 4, 2013 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
ashbuster Posted April 3, 2013 Share Posted April 3, 2013 Hks hard piping is the solution the hks pipe rubs in the enginebay tho Link to comment Share on other sites More sharing options...
ashbuster Posted April 3, 2013 Share Posted April 3, 2013 (edited) thats if this pipe is what you meant on the tower Edited April 3, 2013 by ashbuster (see edit history) Link to comment Share on other sites More sharing options...
TubbyTwo Posted April 4, 2013 Author Share Posted April 4, 2013 Thats my old pipe Doesnt fit the stock airbox so no use to me, which is why I sold it. Link to comment Share on other sites More sharing options...
Dnk Posted April 4, 2013 Share Posted April 4, 2013 Make your own custom set up HKS is way over priced hence i did my own Link to comment Share on other sites More sharing options...
ashbuster Posted April 4, 2013 Share Posted April 4, 2013 same here, 76mm metal pipe with a 76mm coupler on the bottom to hold the filter to the hardpipe(76mm will stretch over a 80mm pipe/airfilter). then a simple 76mm elbow on the top to attach it to the stock turbo pipes at 45 degrees Link to comment Share on other sites More sharing options...
SPG Posted April 23, 2013 Share Posted April 23, 2013 Anyone still looking for one of these Silicone based pipes? Link to comment Share on other sites More sharing options...
TubbyTwo Posted April 23, 2013 Author Share Posted April 23, 2013 yep I need one badly!! Link to comment Share on other sites More sharing options...
james_cbr Posted April 23, 2013 Share Posted April 23, 2013 itrested in hard pipe silicon set up as my tt lump dident come with anything from the inlet Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now