Kev.O Posted March 26, 2013 Share Posted March 26, 2013 Chris Wilson can do flow-testing. Chris flowed mine too. I think he is, he mentioned that he's a part of Syvecs now (director?) and can only really support that product. Who does that leave to map AEM's? Quote Link to comment Share on other sites More sharing options...
Stephendjb Posted March 26, 2013 Share Posted March 26, 2013 Who does that leave to map AEM's? Ryan is recommending Martin Batty Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted March 26, 2013 Share Posted March 26, 2013 Even when Ryan was a director he still offered to map AEM as his company is 2bar tuning. Unless he has changed his policy the past year? Quote Link to comment Share on other sites More sharing options...
T14PPA Posted March 26, 2013 Author Share Posted March 26, 2013 I bought the ecu off ryan and we made a deal to map and fit my ecu so i hope he dont go back on his word Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 26, 2013 Share Posted March 26, 2013 (edited) Just to clarify, the injectors I sold were from Carbon Bullet/Geos old car when he suffered the crash. They were delivered to me in secure post and packaging and I never removed them as I was planning my Big Twin build. I therefore listed these and sold them to the TI4PRA as they were. I advised they had not been flow tested to my recollection but had been working perfectly in Carbon Bullets car. You should not be running these as advised mate without proper ECU timed fuelling. I posted a few links up here previously about getting injectors cleaned and flow tested but I honestly think you should start with your mapping first! The injectors were working perfectly to my honest knowledge. EDIT: This is a good place if Chris Wilson cannot do them. Read a few reviews. http://www.injectortune.co.uk/Injector_Cleaning.html Edited March 26, 2013 by Sheefa (see edit history) Quote Link to comment Share on other sites More sharing options...
Ian C Posted March 27, 2013 Share Posted March 27, 2013 http://www.mkivsupra.net/vbb/showthread.php?286949-Who-to-use-for-AEM-Single-Turbo-mapping!&p=3624269&viewfull=1#post3624269 "I can only apologies but being a director of Syvecs has big asks of me and I need to be seen just supporting our products" Fair enough really Quote Link to comment Share on other sites More sharing options...
imi Posted March 27, 2013 Share Posted March 27, 2013 (edited) I understand that but as they are used injectors i thought that would be the problem. I dont know where to test them. I thought i could run the 800cc injectors calmly untill i get it mapped not good form dishing dirt over sheefa when you clearly have zero clue. Edited March 27, 2013 by imi (see edit history) Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 27, 2013 Share Posted March 27, 2013 not good form dishing dirt over sheefa when you clearly have zero clue. Quote Link to comment Share on other sites More sharing options...
T14PPA Posted March 28, 2013 Author Share Posted March 28, 2013 not good form dishing dirt over sheefa when you clearly have zero clue. Firstly i never said anything bad about sheefa so stop talking rubbish and think what you want mate i couldnt care less Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.