Crash Bandicoot Posted March 21, 2013 Share Posted March 21, 2013 Will these fit my stock supra? Rears are 18 x 10j with a -38 offset Fronts are 18 x 9j with a -25 offset Quote Link to comment Share on other sites More sharing options...
Zeiretto Posted March 21, 2013 Share Posted March 21, 2013 (edited) If they're +38 and +25 they should fit.. -38 and -25 will not (those are widebody offsets). Don't forget you'll most likely have to roll your fenders! Edited March 21, 2013 by Zeiretto (see edit history) Quote Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted March 21, 2013 Author Share Posted March 21, 2013 Wide arches on the front and rear? When fitting wide arches do you cut away the standard arches? Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 21, 2013 Share Posted March 21, 2013 Google Search wheel offset calculators this will help show you how each offset moves the wheel in or out from the stock set up Quote Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted March 21, 2013 Author Share Posted March 21, 2013 The calculators aren't car specific and are confusing :/ anyone on here a wheel specialist? Quote Link to comment Share on other sites More sharing options...
Tyson Posted March 21, 2013 Share Posted March 21, 2013 What are the wheels called and do you have a link ? Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted March 21, 2013 Share Posted March 21, 2013 Stock offset is +50, now imagine -38. Quote Link to comment Share on other sites More sharing options...
jay200bhp Posted March 21, 2013 Share Posted March 21, 2013 i have a set of -15 and had to have a rear roll and front widened 35mm ridox autoshine fenders so nope wont fit without alot of hammering Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 21, 2013 Share Posted March 21, 2013 You have no chance of fitting a -38 offset Jay If they are actually a + offset then you won't be able to fit the +25 without some bodywork If the offsets are the minus you listed , then forget them mate, they will be miles out I got the money as well, Thanks Jay:D Quote Link to comment Share on other sites More sharing options...
Nic Posted March 21, 2013 Share Posted March 21, 2013 Will these fit my stock supra? Rears are 18 x 10j with a -38 offset Fronts are 18 x 9j with a -25 offset No The fronts would stick out past the wheel arches by around 62mm each side, the rears would stick out by around 74mm. The following sizes and offsets will sit roughly flush with the stock arches without them having to be rolled (although this may vary depending on tyre brand and size). You can use these to compare how other sizes and offsets will fit. Front 9" +35 Rear 10" +35 Quote Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted March 22, 2013 Author Share Posted March 22, 2013 They're the Boyd coddington 18s on eBay. I want them so bad!! Quote Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted March 22, 2013 Author Share Posted March 22, 2013 This isn't sounding too good It's either go turbo or fork out for the wheels tyres and bodywork to fit. Power or looks... Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 22, 2013 Share Posted March 22, 2013 No The fronts would stick out past the wheel arches by around 62mm each side, the rears would stick out by around 74mm. The following sizes and offsets will sit roughly flush with the stock arches without them having to be rolled (although this may vary depending on tyre brand and size). You can use these to compare how other sizes and offsets will fit. Front 9" +35 Rear 10" +35 That's too wide even for the TRD widebody ! Quote Link to comment Share on other sites More sharing options...
Zeiretto Posted March 22, 2013 Share Posted March 22, 2013 I have the same dilemma! I decided on going turbo + BPU this summer.. Paintjob and wheels next year! You should decide which of the two you find more exciting to think about. Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 22, 2013 Share Posted March 22, 2013 (edited) If they stick out as far as Nic says and you decide to go bling over power you need to find a widebody kit wide enough. This could also be very expensive and i'd recommend you look for that first or you could be into a 1 off kit costing even more money Edited March 22, 2013 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
listy Posted March 22, 2013 Share Posted March 22, 2013 As Dnk says mate, if they wont fit without major bodywork, its going to cost £££££££. Personally, I'd go for a different set of wheels with an agressive offset and stance. Function over form is where the sensible money goes. Plus, as its an NA, you'll only crave more power (happens to everyone) and you'll kick yourself for not having the money for it. Plus, I see it pointless in having a car that looks like its got the guts, if it hasn't. End of the day though, you are the only one who can make the choice, just think before jumping in Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 22, 2013 Share Posted March 22, 2013 Those wheels with that offset are not for any road Supra I will Pm my number Jay, then I can talk you out of wasting the money:D Quote Link to comment Share on other sites More sharing options...
Kaan W Posted March 22, 2013 Share Posted March 22, 2013 They should fit my car quite nice Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 22, 2013 Share Posted March 22, 2013 They should fit my car quite nice You have no chance either, the ones I have just got are +4 offset and are to big really Quote Link to comment Share on other sites More sharing options...
Kaan W Posted March 22, 2013 Share Posted March 22, 2013 You have no chance either, the ones I have just got are +4 offset and are to big really I have -20 with a 12j and 30mm spacer. Would these fit - http://www.ebay.co.uk/itm/SSR-Professor-SP1-18-5x114-3-13J-3PC-Split-Rim-Alloy-Wheels-JDM-Deep-Dish-200SX-/140925776674?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item20cfd4b322 Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 22, 2013 Share Posted March 22, 2013 I have -20 with a 12j and 30mm spacer. Would these fit - http://www.ebay.co.uk/itm/SSR-Professor-SP1-18-5x114-3-13J-3PC-Split-Rim-Alloy-Wheels-JDM-Deep-Dish-200SX-/140925776674?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item20cfd4b322 That would mean you are running a -50 offset, that can't be right Kaan, are you sure you are not running a +20 with a 30mm spacer, that would make more sense Quote Link to comment Share on other sites More sharing options...
Kaan W Posted March 22, 2013 Share Posted March 22, 2013 That would mean you are running a -50 offset, that can't be right Kaan, are you sure you are not running a +20 with a 30mm spacer, that would make more sense Im not to sure to be honest mate I bought my wheels from Parry_10 listed as a -20 offset so I always thought thats what they were Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 22, 2013 Share Posted March 22, 2013 Offset is confusing as hell lmao Anyway, there is no way the wheels listed by Jay are fitting on his stock body without some major money spent To be honest I have just searched Ebay for them and I am glad they won't fit.....Jay we need to talk:nyah: Quote Link to comment Share on other sites More sharing options...
listy Posted March 22, 2013 Share Posted March 22, 2013 Im not to sure to be honest mate I bought my wheels from Parry_10 listed as a -20 offset so I always thought thats what they were Must be +20 mate. I have +35 with 25mm spacers and my rear arches are just pulled. If yours were -20 with 30mm spacers, they'd stick out a mile. To be honest I have just searched Ebay for them and I am glad they won't fit.....Jay we need to talk:nyah: Me too Quote Link to comment Share on other sites More sharing options...
James Posted March 22, 2013 Share Posted March 22, 2013 Im not to sure to be honest mate I bought my wheels from Parry_10 listed as a -20 offset so I always thought thats what they were They are +20. The GTR-D is only available in ET0 or ET20 when at 12" width. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.