supra900bhp Posted March 17, 2013 Share Posted March 17, 2013 Hi boys and girls I have been on a long build as most of us do and been so long im not sure 100 % where all the pipes go as its been striped so long for new head gasket, gaskets and full respray. I am after some pic's close up so can see where the pipes start and end (i did this at the start but computer died! so lost everything) or anything that gives me a good look where they go. I have looked on here but im not good at the search button lol so there is prob a thread all about it but just carn't see it cheers for your help guys!!! Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 17, 2013 Share Posted March 17, 2013 Get someone to pop round and park next to your car with the bonnet up Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 17, 2013 Share Posted March 17, 2013 i might be able to help ill have alook through some photos but its a little obvious too as long as you still have the hard vac pipes they all kindof line up. ill have a look through my pix mate Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 17, 2013 Share Posted March 17, 2013 this ok mate? these were already on the forum but show where the vac pipes go Quote Link to comment Share on other sites More sharing options...
supra900bhp Posted March 17, 2013 Author Share Posted March 17, 2013 i might be able to help ill have alook through some photos but its a little obvious too as long as you still have the hard vac pipes they all kindof line up. ill have a look through my pix mate that would be grate mate! I have the hard pipes still so thats not to bad its mainly round back of engine and around the intake manifold but really just want check that I got them the right away around on the vsv's etc as been so long Quote Link to comment Share on other sites More sharing options...
supra900bhp Posted March 17, 2013 Author Share Posted March 17, 2013 they are grate mate do have any as if under the manifold throtte body area? right off out the garage to see where i gone wrong lol Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 17, 2013 Share Posted March 17, 2013 lol no worries, ill pop out and take some when it stops raining lol Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 17, 2013 Share Posted March 17, 2013 here is a diagram but it migt be a little harder to understand prevvti vvti Quote Link to comment Share on other sites More sharing options...
RobUK Posted March 17, 2013 Share Posted March 17, 2013 I have just had the same problem, but there is an TT engine for sale on eBay with some excellent close up pictures... I knew 90% but probably like you there are some that you just scratch your head over Quote Link to comment Share on other sites More sharing options...
supra900bhp Posted March 17, 2013 Author Share Posted March 17, 2013 ashbuster and robuk you two have saved my day!! THANKS GUYS!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 17, 2013 Share Posted March 17, 2013 no worries mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.