Supralee Posted March 14, 2013 Share Posted March 14, 2013 Hi guys, Just a quickie got a new bonnet with aerocatches fitted as this Now I'm fitting Tue bolts but cannot get access the bottom of Tue bolt for the screw if I drill. Now I'm assuming I have to remove original bonnet catches to gain access to bottom and will need to remove lights due to positioning of bolts. Does anyone else know if anything else needs to come out before I remove these and make an attempt or anyone got there catches here. I've marked where I will be drilling... Cheers Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 You shouldnt need to drill anywhere. Most people use holes that are already there. If the previous owner of the bonnet drilled holes, they were a little bit silly really. Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 Have a look through my project thread, I did a how to, on fitting these with loads of pics. Link to comment Share on other sites More sharing options...
Supralee Posted March 14, 2013 Author Share Posted March 14, 2013 Have a look through my project thread, I did a how to, on fitting these with loads of pics. Nice one, cheers hodge. 431 pages . Cup of t and have a good read I think. Now that's a project thread and a half ill enjoy reading that and get some more useful tips . Cheers Link to comment Share on other sites More sharing options...
Steve Posted March 14, 2013 Share Posted March 14, 2013 Let me know when you find the correct post for that 'how to guide' Its something I need to fit on mine Link to comment Share on other sites More sharing options...
James Posted March 14, 2013 Share Posted March 14, 2013 http://www.mkivsupra.net/vbb/showthread.php?196108-Hodge-s-(The-Kraken)-Supra-build&p=3109479&viewfull=1#post3109479 Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 http://www.mkivsupra.net/vbb/showthread.php?196108-Hodge-s-(The-Kraken)-Supra-build&p=3109479&viewfull=1#post3109479 There it is Link to comment Share on other sites More sharing options...
ashbuster Posted March 14, 2013 Share Posted March 14, 2013 i tried to look but i get lost and start reading through lol great project thread Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 I'm sure mine use stock holes already in the framework. But they are in a different place than Hodges. I'll try and get a picture tomorrow when its light. Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 Let me know when you find the correct post for that 'how to guide' Its something I need to fit on mine Steve, feel free to take this from my project thread and make it a sticky in the FAQ section if members will find it usefull. Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 Steve, feel free to take this from my project thread and make it a sticky in the FAQ section if members will find it usefull. I was thinking that earlier but was at work and completely forgot about it Link to comment Share on other sites More sharing options...
Supralee Posted March 14, 2013 Author Share Posted March 14, 2013 Cheers guys , although I now finding myself reading through the whole thread .Great stuff in there hodge, great read and amazing car, credit to ya. still can't get over you've not done bodywork before ..not that I've finished it all yet . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now