Supralee Posted March 14, 2013 Share Posted March 14, 2013 Hi guys, Just a quickie got a new bonnet with aerocatches fitted as this Now I'm fitting Tue bolts but cannot get access the bottom of Tue bolt for the screw if I drill. Now I'm assuming I have to remove original bonnet catches to gain access to bottom and will need to remove lights due to positioning of bolts. Does anyone else know if anything else needs to come out before I remove these and make an attempt or anyone got there catches here. I've marked where I will be drilling... Cheers Quote Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 You shouldnt need to drill anywhere. Most people use holes that are already there. If the previous owner of the bonnet drilled holes, they were a little bit silly really. Quote Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 Have a look through my project thread, I did a how to, on fitting these with loads of pics. Quote Link to comment Share on other sites More sharing options...
Supralee Posted March 14, 2013 Author Share Posted March 14, 2013 Have a look through my project thread, I did a how to, on fitting these with loads of pics. Nice one, cheers hodge. 431 pages . Cup of t and have a good read I think. Now that's a project thread and a half ill enjoy reading that and get some more useful tips . Cheers Quote Link to comment Share on other sites More sharing options...
Steve Posted March 14, 2013 Share Posted March 14, 2013 Let me know when you find the correct post for that 'how to guide' Its something I need to fit on mine Quote Link to comment Share on other sites More sharing options...
James Posted March 14, 2013 Share Posted March 14, 2013 http://www.mkivsupra.net/vbb/showthread.php?196108-Hodge-s-(The-Kraken)-Supra-build&p=3109479&viewfull=1#post3109479 Quote Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 http://www.mkivsupra.net/vbb/showthread.php?196108-Hodge-s-(The-Kraken)-Supra-build&p=3109479&viewfull=1#post3109479 There it is Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 14, 2013 Share Posted March 14, 2013 i tried to look but i get lost and start reading through lol great project thread Quote Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 I'm sure mine use stock holes already in the framework. But they are in a different place than Hodges. I'll try and get a picture tomorrow when its light. Quote Link to comment Share on other sites More sharing options...
hodge Posted March 14, 2013 Share Posted March 14, 2013 Let me know when you find the correct post for that 'how to guide' Its something I need to fit on mine Steve, feel free to take this from my project thread and make it a sticky in the FAQ section if members will find it usefull. Quote Link to comment Share on other sites More sharing options...
listy Posted March 14, 2013 Share Posted March 14, 2013 Steve, feel free to take this from my project thread and make it a sticky in the FAQ section if members will find it usefull. I was thinking that earlier but was at work and completely forgot about it Quote Link to comment Share on other sites More sharing options...
Supralee Posted March 14, 2013 Author Share Posted March 14, 2013 Cheers guys , although I now finding myself reading through the whole thread .Great stuff in there hodge, great read and amazing car, credit to ya. still can't get over you've not done bodywork before ..not that I've finished it all yet . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.