_Shane_ Posted March 10, 2013 Share Posted March 10, 2013 Going to start sorting pipework from the T51 to the fmic and im looking for some advice The outlet on the turbo is 3.2'', i am thinking of getting a reducer for this bit 3.2'' -> 3.0'' The fmic has 3'' outlet/inlet but on the old turbo setup it was running 2.5'' pipework after a reducer 3'' -> 2.5'' etc For the T51 should i use 3'' piping or 2.5'' If anyone has some suggestions i would appreciate them and also if someone may have a picture of the pipe route for a T51 on a supra Thanks Quote Link to comment Share on other sites More sharing options...
abtin90 Posted March 10, 2013 Share Posted March 10, 2013 I'd personally go with 3" piping Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted March 10, 2013 Author Share Posted March 10, 2013 thats what im thinking too mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.