kaliber Posted March 8, 2013 Share Posted March 8, 2013 Going single this year with following setup: Built head with gsc stage 1 cams E85 1200cc injectors, fuelrail and everything needed 4" dp+mp+exhaust The turbos I im thinking about are pte 6766 or the Borg Warner S300SX 8375 Turbo S360 with 1.0 A/R I´m aiming at 600whp and a safe engine, I know that there can be more power made with this setup but I would like a very safe setup for now and maybe uppgrade later for even more power Quote Link to comment Share on other sites More sharing options...
Wez Posted March 8, 2013 Share Posted March 8, 2013 What ECU and transmission do you have? Quote Link to comment Share on other sites More sharing options...
Dan_Turism0 Posted March 8, 2013 Share Posted March 8, 2013 Precisions 6466 mate spools like a 62mm and has shit loads of headroom if you want to push higher SP Racing have had over 800whp out of them Quote Link to comment Share on other sites More sharing options...
kaliber Posted March 8, 2013 Author Share Posted March 8, 2013 What ECU and transmission do you have? I will buy a maxx ecu (swedish company) and i have the v161 gearbox with uppgraded clutch(came with the car so not sure whats in there) Quote Link to comment Share on other sites More sharing options...
teddan Posted March 8, 2013 Share Posted March 8, 2013 the best ECU on the market mate! Quote Link to comment Share on other sites More sharing options...
listy Posted March 8, 2013 Share Posted March 8, 2013 the best ECU on the market mate! Better than a Syvecs? Quote Link to comment Share on other sites More sharing options...
Luxluc Posted March 8, 2013 Share Posted March 8, 2013 Have a look at the BL 366 turbo http://www.theboostlab.com/store/products/BL366%252dHF-%28High-Flow%29.html Quote Link to comment Share on other sites More sharing options...
thetrashcanman Posted March 8, 2013 Share Posted March 8, 2013 Better than a Syvecs? Maybe in Sweden? bet yeah in my opinion your better of with Syvecs Quote Link to comment Share on other sites More sharing options...
teddan Posted March 8, 2013 Share Posted March 8, 2013 So far maxxecu are only launched in the swedish market but it will be launch abroad. For the moment the buyers are lot more then the units that are manufactured. Quote Link to comment Share on other sites More sharing options...
Wez Posted March 8, 2013 Share Posted March 8, 2013 the best ECU on the market mate! That`s a very large claim. Quote Link to comment Share on other sites More sharing options...
kaliber Posted March 8, 2013 Author Share Posted March 8, 2013 I asked for help with what turbo to choose, not ecu Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted March 8, 2013 Share Posted March 8, 2013 Borg Warner dude, should give a lovely thump with that set up. Make sure you put up pics when it's all going together! Quote Link to comment Share on other sites More sharing options...
Antti Posted March 9, 2013 Share Posted March 9, 2013 Why you wanna choose one from these specific turbos? Do you have any experiences from BW EFR turbos in Sweden? These should be really quickly spooling. I dont know why but in Finland basicly everyone is going for Holset turbos, holset hx40 super or hx 40 mfs would suit your needs really well! And pricewise little bit cheaper. Quote Link to comment Share on other sites More sharing options...
kaliber Posted March 9, 2013 Author Share Posted March 9, 2013 I´m open for other turbos as well antti, I just choosed these two as they are used all over the place on supras and that makes it easier to read up on them and see what experience people have with these... This will be my first single build so I´m a noob on turbos, trying to read as mutch as i can about this:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.