Littler Posted February 23, 2013 Share Posted February 23, 2013 Evening Guys, As you know I'm gathering parts for my build and in a search for setups with good/early torque curves I came across this kit that got released early last year, not something I'm considering really but curious about what people thought, particularly with the area under the curve and it's with a 6266 turbo (slightly ignoring that it's on E85 and it's US BHP lol) http://www.supraforums.com/forum/showthread.php?681439-Product-Release-SP-Racing-Torque-Monster-Turbo-kit-for-93-98-MKIV-Supra&highlight=6266+6766 Adam Link to comment Share on other sites More sharing options...
Wez Posted February 23, 2013 Share Posted February 23, 2013 Not sure on that wastegate pipe. Link to comment Share on other sites More sharing options...
Littler Posted February 23, 2013 Author Share Posted February 23, 2013 Not sure on that wastegate pipe. In terms of the lack of flex? Link to comment Share on other sites More sharing options...
Steve Posted February 23, 2013 Share Posted February 23, 2013 I would have preferred to see the wastegate pipe go in at an angle to help flow rather than straight in. Link to comment Share on other sites More sharing options...
Littler Posted February 23, 2013 Author Share Posted February 23, 2013 I would have preferred to see the wastegate pipe go in at an angle to help flow rather than straight in. Ah I see what you mean, the fact it isn't far off 90 degrees to the downpipe can't help flow Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 23, 2013 Share Posted February 23, 2013 Yeah as above. It does look a nice kit though... Why you considering shopping abroad though? Link to comment Share on other sites More sharing options...
Littler Posted February 23, 2013 Author Share Posted February 23, 2013 (edited) Yeah as above. It does look a nice kit though... Why you considering shopping abroad though? I'm not dude, not really considering the kit as I've pretty much sorted the route I'm going (ish) just need to spend some cash lol, just was searching for good torque setups and this popped up in the results and seemed interesting Edited February 23, 2013 by Littler (see edit history) Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 23, 2013 Share Posted February 23, 2013 Oh ok cool mate. I think it looks a good enough kit. Link to comment Share on other sites More sharing options...
Justin Bieber Posted February 23, 2013 Share Posted February 23, 2013 Whats the actual difference between E85 and say V-power? Higher octane rating? Link to comment Share on other sites More sharing options...
Guest Budz86 Posted February 23, 2013 Share Posted February 23, 2013 E85 is race fuel, so 105 octane IIRC Link to comment Share on other sites More sharing options...
Littler Posted February 23, 2013 Author Share Posted February 23, 2013 Yeah it has a bit more kick Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 23, 2013 Share Posted February 23, 2013 Whats the actual difference between E85 and say V-power? Higher octane rating? Race fuel. Vpower is only 99 and e85 is 100ish Link to comment Share on other sites More sharing options...
Justin Bieber Posted February 23, 2013 Share Posted February 23, 2013 Huh so its not that much more potent that V power in the grand scheme of things? The yanks are doing some interesting things with cast manifolds, E85 and high compression: http://www.supraforums.com/forum/showthread.php?683895-6466-made-over-900-RWHP&highlight=cast+manifold I know its american hp again but even if the dynos are 15% out its still a shed load of power through a 3" exhaust Link to comment Share on other sites More sharing options...
Swampy442 Posted February 23, 2013 Share Posted February 23, 2013 That manifold looks awful, if you were going for a cast one Id say Arnout or Treadstone. That and the wastegate piping as mentioned. Link to comment Share on other sites More sharing options...
dandan Posted February 23, 2013 Share Posted February 23, 2013 There are 3 things that would put me off that straight away.... 1. The wastegate adaptor flange is very thin for a 2 bolt flange and (IMHO) won't remain leak free for long 2. No flex in wastegate pipe 3. Horrible wastegate pipe re-entry into downpipe Plus it's all a bit of a gross pseudo chrome finish Link to comment Share on other sites More sharing options...
Wez Posted February 24, 2013 Share Posted February 24, 2013 Whats the actual difference between E85 and say V-power? Higher octane rating? E85 is a bio fuel with upto 85% ethanol content. It's available at some pumps but very rare sadly, it requires a complete remap and you need to use about 3rd more fuel to get the same power, if your motor has a flexifuel sensor then you can mix E85 and normal petrol and if setup correctly it should trim fuelling and timing on the fly. Link to comment Share on other sites More sharing options...
thetrashcanman Posted February 24, 2013 Share Posted February 24, 2013 This looks pretty good tbh, love having a torque engine don't the american's love E85 because the jungle juice they get is pretty limp wristed in comparison to the 97/95 octane stuff we get over here? Link to comment Share on other sites More sharing options...
Stephendjb Posted February 24, 2013 Share Posted February 24, 2013 Log manifold & a QSV? I've seen that idea somewhere before....... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now