TBDevelopments Posted February 18, 2013 Share Posted February 18, 2013 Got a little leak coming from the common place near the back of the engine where the pipes come through the bulkhead from the heater matrix (x2) then go into the 2 small copper pipes, then back to rubber over the engine. Does anyone make silicone hoses for this section? saves having all the joins etc would be nice to just have 1 hose from bulkhead to end position for both hoses Just an idea while i'm replacing them anyway Tim Quote Link to comment Share on other sites More sharing options...
hodge Posted February 18, 2013 Share Posted February 18, 2013 Use some superflex hose from viper performance and mikalor clamps. Works a treat and looks good too. It's only 30 quid a metre compared to almost £100 for new hoses from toyota. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.