Mariusz Posted February 9, 2013 Share Posted February 9, 2013 (edited) Hi Guys My Supe was pulling to the left and rear camber was clearly out as she was wearing the tyre edges very quickly. I have just had them adjusted today and feels better, but still pulls slightly left??? No knocks or adage to the vehicle and underside is clean.?? The car was lowered on some BC's, will,this be affecting the accuracy of alignment? Here are the new settings after alignment! Edited February 9, 2013 by Mariusz (see edit history) Quote Link to comment Share on other sites More sharing options...
Abz Posted February 9, 2013 Share Posted February 9, 2013 When was the last time you checked tyre pressure? Quote Link to comment Share on other sites More sharing options...
scott87 Posted February 9, 2013 Share Posted February 9, 2013 Did they balance the tyres as well? Quote Link to comment Share on other sites More sharing options...
Nic Posted February 9, 2013 Share Posted February 9, 2013 Some suggestions: tyre pressures, uneven tyre wear, tyre balance, sticking brake calliper, leaking damper, uneven ride height Quote Link to comment Share on other sites More sharing options...
Abz Posted February 9, 2013 Share Posted February 9, 2013 Some suggestions: tyre pressures, uneven tyre wear, tyre balance, sticking brake calliper, leaking damper, uneven ride height Good point by Nic about the uneven right height as you have had after market lowering springs fitted. Quote Link to comment Share on other sites More sharing options...
Dnk Posted February 9, 2013 Share Posted February 9, 2013 Are you on a flat level road as most roads camber to the gutter so a car tends to do the same Also you should have a proper geo done if you have adjustable ride height suspension. Quote Link to comment Share on other sites More sharing options...
Mariusz Posted February 9, 2013 Author Share Posted February 9, 2013 Great help guys , I will check all pressures and definitely the suspension height ! Thanks Quote Link to comment Share on other sites More sharing options...
supraGZaerotop Posted February 9, 2013 Share Posted February 9, 2013 Getting my geo done also, got to fit new rear lower toe arm and rear shocks first tho, managed to get a part worn 275/35/18 as only the one side has scrubbed out. Hopefully a geo and my new parts will sort it Quote Link to comment Share on other sites More sharing options...
supraGZaerotop Posted November 2, 2013 Share Posted November 2, 2013 will replacing the front and rear antiroll bar bushes to super pro, and also the steering rack mount kit help in the alignment and General road manners of the supra, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.