Guigsy Posted January 2, 2013 Share Posted January 2, 2013 Anyone else got this problem and know of a cure? My belts don't retract properly. Or they do but very slowly. And it's annoying. Link to comment Share on other sites More sharing options...
marc_p Posted January 2, 2013 Share Posted January 2, 2013 I had this in one of my Supe's, no fix I'm afraid, the mechanism will more than likely be buggared, but you can probably get some decent ones from Kieran for not a whole lotta money Link to comment Share on other sites More sharing options...
Guigsy Posted January 2, 2013 Author Share Posted January 2, 2013 They are a pita to change though Link to comment Share on other sites More sharing options...
skippyboyo1 Posted January 2, 2013 Share Posted January 2, 2013 There easy mate! Just remove the trim Link to comment Share on other sites More sharing options...
marc_p Posted January 2, 2013 Share Posted January 2, 2013 There easy mate! Just remove the trim As above, took me about 20 mins a side to do, I didn't un bolt the entire trim, just enough to get the belts in and out with. Link to comment Share on other sites More sharing options...
Guigsy Posted January 2, 2013 Author Share Posted January 2, 2013 Yeah I know but I'm a lazy fecker Link to comment Share on other sites More sharing options...
Josh Posted January 2, 2013 Share Posted January 2, 2013 If it's twisted, the mechanism in mine isn't powerful enough to untwist the belt. If it isn't, they fly back at an unimaginable speed! Link to comment Share on other sites More sharing options...
marc_p Posted January 2, 2013 Share Posted January 2, 2013 Yeah I know but I'm a lazy fecker Just drive to Kierans and get him to fit them for you aswell then Link to comment Share on other sites More sharing options...
mattdavies Posted January 2, 2013 Share Posted January 2, 2013 You can drive pulling the whole belt out and hoovering it, do this a few times. This worked for me on an old car of mine Link to comment Share on other sites More sharing options...
Sheefa Posted January 2, 2013 Share Posted January 2, 2013 This is blooming annoying mate!! I have the same problem on drivers side and there's so much flex that if I was to hit something I would have another foot of extra belt in front of me before I hit the windshield! I bought a harness to resolve the problem and do away with seat belt! Bignum mentioned just replacing the seatbelt tensioner. Link to comment Share on other sites More sharing options...
Stevo Posted January 2, 2013 Share Posted January 2, 2013 There's a repair thread on here somewhere written by Jay I think. Will have a look in the morning and post if I find it. Link to comment Share on other sites More sharing options...
SilverSoop Posted January 3, 2013 Share Posted January 3, 2013 A Supra I test drove not long back had that exact same problem... Link to comment Share on other sites More sharing options...
benkei Posted January 3, 2013 Share Posted January 3, 2013 I pulled the belt all the way an let it retract a few times, seemed to help. Also a trick, if you find it slackens while driving, unclip it and clip it back in. When you unclip it the belt will retract, as it's already extended a bit and doesn't have to go all the way back in it will tighten up around you, then clip it back in to secure it. Mine seems to have sorted itself now. Link to comment Share on other sites More sharing options...
DaveR Posted January 3, 2013 Share Posted January 3, 2013 I have this exact same problem. In for a repair thread link...! Link to comment Share on other sites More sharing options...
stevie_b Posted January 3, 2013 Share Posted January 3, 2013 Stevo, is this the thread you mean? --> http://www.mkivsupra.net/vbb/showthread.php?207694-Sticky-seatbelt My seatbelt suffers from this too. Link to comment Share on other sites More sharing options...
TubbyTwo Posted January 3, 2013 Share Posted January 3, 2013 same here, rather annoying. Link to comment Share on other sites More sharing options...
David P Posted January 3, 2013 Share Posted January 3, 2013 The drivers side belt on mine was tired so replaced it with a new one from Mr T. Two years ago, it was around £60. Trouble is, it's almost as bad again already. Link to comment Share on other sites More sharing options...
Guigsy Posted January 3, 2013 Author Share Posted January 3, 2013 I'm going to have a go at the thread on the 3rd page of that supra forums link. Seems easy. Link to comment Share on other sites More sharing options...
TubbyTwo Posted January 3, 2013 Share Posted January 3, 2013 I'm going to have a go at the thread on the 3rd page of that supra forums link. Seems easy. same here, this weekends job. Link to comment Share on other sites More sharing options...
Stevo Posted January 3, 2013 Share Posted January 3, 2013 Stevo, is this the thread you mean? --> http://www.mkivsupra.net/vbb/showthread.php?207694-Sticky-seatbelt My seatbelt suffers from this too. Yep - that's the one. Forgot his username was actually Jevansio... Link to comment Share on other sites More sharing options...
LOGIE Posted January 3, 2013 Share Posted January 3, 2013 Buy New from toyota is my opinion. These are life saving safety equipment. Link to comment Share on other sites More sharing options...
ashbuster Posted January 3, 2013 Share Posted January 3, 2013 i did that with my old seatbelt and it didnt work, i had one given to me from a member here and now thats started to do it lol need to buy new by the looks of it Link to comment Share on other sites More sharing options...
Sheefa Posted January 3, 2013 Share Posted January 3, 2013 I pulled the belt all the way an let it retract a few times, seemed to help. Also a trick, if you find it slackens while driving, unclip it and clip it back in. When you unclip it the belt will retract, as it's already extended a bit and doesn't have to go all the way back in it will tighten up around you, then clip it back in to secure it. Mine seems to have sorted itself now. Does not work for me - long term. As soons as you unclip and clip back in, yes it tightens but with any cornering it loosens again! Link to comment Share on other sites More sharing options...
Ian C Posted January 3, 2013 Share Posted January 3, 2013 The drivers side belt on mine was tired so replaced it with a new one from Mr T. Two years ago, it was around £60. Trouble is, it's almost as bad again already. I have to feed mine back in like I'm posting several letters, I agree buying new would be the way to go, have you got the part number handy? Link to comment Share on other sites More sharing options...
Sheefa Posted January 3, 2013 Share Posted January 3, 2013 (edited) I have to feed mine back in like I'm posting several letters, I agree buying new would be the way to go, have you got the part number handy? Ian, I've asked Keron to get me a new one. Around £51 for the item. Worth just doing that mate as he mentioned he has to get a few. Part numbers here in pic. I believe it's 73210 you need, although that part doesn't appear to be allocated to the tension mechanism. Edited January 3, 2013 by Sheefa (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now