cooke Posted November 13, 2012 Share Posted November 13, 2012 How hard is it to take off the rubber coating on the dash pannels, does anyone have any tips and should i do it or leave it on? Link to comment Share on other sites More sharing options...
Dnk Posted November 13, 2012 Share Posted November 13, 2012 Pretty sure a search on here should bring up some answers as lots of members have done it Link to comment Share on other sites More sharing options...
pbryant_knight Posted November 13, 2012 Share Posted November 13, 2012 I did mine not long ago. Ita a pain and requires perceverance. I sanded it off using 3M sandblaster Sandpaper. I did the gear surround, left dash panel, upper panel and centre dial panel but left the one on the right as that was in ok condition and i just painted the other panels matt black. Why Toyota decided to do tjhis with the dash panels is beyond me. Peter Link to comment Share on other sites More sharing options...
Littler Posted November 13, 2012 Share Posted November 13, 2012 As i've only recently discovered acetone (99%) works great, the time to do it wasn't anywhere near as long as using other methods! Link to comment Share on other sites More sharing options...
Nic Posted November 13, 2012 Share Posted November 13, 2012 I've stripped quite a few sets of dash panels the easiest method I've found is to use meths or white spirit and then use a plastic scraper, the meths softens the coating so that it just peels off. Link to comment Share on other sites More sharing options...
cooke Posted November 13, 2012 Author Share Posted November 13, 2012 methylated spirits mite be my best option as i dont want to damage the plastic under the rubber, im just going two keep it like that without painting of covering the pannels, i started the gear surround pannel when i posted this thread and i just scraped it off with my nail and hot soapy water and im only done now. I hate the stuff lol its a nightmare. can i ask how the clock an heater controls come apart form the center dash Link to comment Share on other sites More sharing options...
Slam Posted November 13, 2012 Share Posted November 13, 2012 cooke said: methylated spirits mite be my best option as i dont want to damage the plastic under the rubber, im just going two keep it like that without painting of covering the pannels, i started the gear surround pannel when i posted this thread and i just scraped it off with my nail and hot soapy water and im only done now. I hate the stuff lol its a nightmare. can i ask how the clock an heater controls come apart form the center dash Screws in be hind,just pull the fan & heater nobs of the front Link to comment Share on other sites More sharing options...
cooke Posted November 13, 2012 Author Share Posted November 13, 2012 Thanks Link to comment Share on other sites More sharing options...
king hit kiz Posted November 14, 2012 Share Posted November 14, 2012 Did mine recently and seriously sounds stupid but soak in oven cleaner for about 20min on each piece just spray on and wait and it basically all comes of with a wipe. Link to comment Share on other sites More sharing options...
Slam Posted November 14, 2012 Share Posted November 14, 2012 king hit kiz said: Did mine recently and seriously sounds stupid but soak in oven cleaner for about 20min on each piece just spray on and wait and it basically all comes of with a wipe. gotta try this one, i done mine not so long ago, had one or two issues. Link to comment Share on other sites More sharing options...
Slam Posted November 14, 2012 Share Posted November 14, 2012 Which brand of oven cleaner? Link to comment Share on other sites More sharing options...
Guest version30 Posted November 14, 2012 Share Posted November 14, 2012 When I did mine I used oven cleaner. Cif I think. Leave on 30 mins then use a green pad to wipe off. Really easy and the green pad scourers the plastic just enough for the primer to get a good grip on the plastic. Link to comment Share on other sites More sharing options...
skippyboyo1 Posted November 14, 2012 Share Posted November 14, 2012 Ipa is the way to go Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now