Brothy Posted November 3, 2012 Share Posted November 3, 2012 I have not long since resprayed certain parts in the engine bay, i removed the hks filter i have on my jspec N/A and when i put it back together i noticed that the sponge filter does not sit flush around the base, the car vibrates slightly on idle and upto 1500-2000rpm, could this be the car is taking in to much air due to it not sitting correctly ? It also idles slightly higher than usual Quote Link to comment Share on other sites More sharing options...
Brothy Posted November 3, 2012 Author Share Posted November 3, 2012 I also removed the oil catch tank, everything was placed back correctly and tightened, both pipes were also put back correctly Quote Link to comment Share on other sites More sharing options...
Brothy Posted November 3, 2012 Author Share Posted November 3, 2012 Problem solved ! Quote Link to comment Share on other sites More sharing options...
Geo Posted November 3, 2012 Share Posted November 3, 2012 and the problem was? Quote Link to comment Share on other sites More sharing options...
Brothy Posted November 3, 2012 Author Share Posted November 3, 2012 I had mounted to the strut brace wrong somehow ........ It was hitting the inlet manifold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.